GPS Helps Navigate More Than the Road

As part of my becoming chief editor of CSE, my wife, Amanda, and I agreed to relocate from Portland, Ore., to the Chicago area. Selling a house, finding a new place and preparing for an interstate move had our plate so full we couldn't spend a lot of time planning the long and logistically complex drive (pet-friendly hotels are few and far between these days).

04/01/2007


As part of my becoming chief editor of CSE , my wife, Amanda, and I agreed to relocate from Portland, Ore., to the Chicago area. Selling a house, finding a new place and preparing for an interstate move had our plate so full we couldn't spend a lot of time planning the long and logistically complex drive (pet-friendly hotels are few and far between these days). So, I bought a GPS. And, being a techno geek, I spent as much time researching GPS devices as we spent on planning the trip (shhhh). In the end, considering price vs. features, I bought a good one, justifying that it would help us navigate the intense traffic of Chicago.

I was able to learn the most important features quickly enough, and before we left, I punched in all of the addresses where we would be staying. As a backup, I also searched MapQuest for the driving directions and printed them out for Amanda. And as an extra backup, we threw the road atlas into her car for good measure. Three generations of technology should get us there without too many hassles…

Minutes after the moving truck left, so did we. Everything worked perfectly until we departed early one morning from our hotel in Layton, Utah. The highway was only a short drive, but the GPS directed us to city streets—in the opposite direction. I browsed the GPS unit to ensure that we were on the right track, and didn't worry too much. In my research I had read that it's not uncommon to get directions that you won't expect, which are not only right but time-savers, too. Amanda, however, hadn't done that research.

My cell phone rang. I explained to her that it was fine. She hung up. A few minutes later, she called again and was adamant about stopping to look at a map. We were only a few miles from the highway then, and I had to break hard to pull into the only visible place left to stop before getting to the highway.

A discussion ensued, and I realized that we were in one of those situations where so many people find themselves today when it comes to technology, and that includes discussions about building automation systems and controls, Internet-based project management, electronic-document-management systems and telecommunications technologies.

On the one hand, we have people who are adept at using digital technologies and capable of learning quickly. And on the other hand, we have those who, no matter how intelligent and experienced, are decidedly not adept at digital technologies, being forced to trust or at least follow the people who are. Even the perception of failure is different: with even one instance of a failure, some are willing to unplug from the whole thing forever, while others accept it as a temporary setback and keep moving ahead.

We worked through the situation, and I gained a fresh appreciation of the chasms that exist not only between technologies but between the people who use them. In answer to the question, “Can't we all get along?” the answer is yes.

Send your questions and comments to: Michael.Ivanovich@reedbusiness.com





No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.