# How many tubes for a Coriolis flowmeter?

## One is good, two is better, but why four?

05/12/2011

Dear Control Engineering: The recent story on large Coriolis flowmeters says the design uses four tubes. I’ve seen two-tube flowmeters, so is using more better? Will six or eight be next? It sounds like those fancy razor blades.

Understanding how Coriolis flowmeter technology works will help explain the concept, but it may not help with your shaving.

Recall if you will that Coriolis technology depends on sending your fluid through a vibrating tube. (Here’s a short tutorial as a refresher.) The mass of the flowing fluid changes the nature of the vibrations which provides data for the flow calculation. Single-tube Coriolis flowmeters have the problem that they are affected by ambient vibrations. The sensor has a hard time telling if it is seeing changes induced by the flow or it’s reading vibrations coming through the floor from that compressor down the aisle.

Adding a second tube helped designers reduce that effect by measuring the difference between the two tubes. This allows the device effectively to cancel ambient vibrations.

The move to four tubes is more complicated, so I put the question to Michael Nuber, who is E+H’s product manager for Coriolis flowmeters in Switzerland. He explains, “There are several advantages of the four tube design over conventional designs. First, it allows for better immunity towards external effects. The two-tube design is already a marked improvement, as one tube always moves in the opposite direction of the other, thus intrinsically stabilizing the measurement system. Each of the tubes is always impacted in the opposite way by external effects like pipeline vibrations.

“Having four tubes adds another dimension. Think of it this way: imagine the two tubes vibrating in one plane, for example along the x-axis. By adding two tubes for a total of four, and using what I call the ‘intelligent mechanical design,’ you also add another plane, the y-axis. That means that the whole measurement system is not only immune to external effects in one plane, but also in another plane that is angled at 90°. The x-y plane then allows for compensating virtually in any direction the external effect might come from.

“Second, having four tubes allows us better use of the circular area. In the same way that a high-performance car engine may have four valves instead of two for each cylinder, it allows us to use smaller measuring tubes. Those allow for reduced wall thicknesses, granting better density accuracy. In addition, the bending stiffness of the smaller tube is lower, either allowing for a higher sensitivity at the same overall length, or the same sensitivity while reducing the length of the sensor.”

Peter Welander, pwelander@cfemedia.com

The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.

## Integrator Guide

 Search the online Automation Integrator Guide

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

## Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.