How sustainable is an industrial fieldbus infrastructure?

More industrial automation component vendors are offering Ethernet provision as standard on their devices.

03/05/2013


A new study by IMS Research – now part of IHS Inc. – estimates that fieldbus protocols accounted for 75% of new industrial automation component network connections in 2011. This is projected to fall to 69% in 2016. New network connections using fieldbus protocols are still some way ahead that of Ethernet, yet growth of Ethernet connections is expected to be considerably higher to 2016.

More industrial automation component vendors are offering Ethernet provision as standard on their devices. A number of vendors released new products in 2012 which put the emphasis squarely on connectivity via Ethernet technology. As these vendors push the adoption of Ethernet protocols it requires machine builders and end users to switch from older fieldbus technologies.

IHS analyst for industrial Ethernet, fieldbus, and wireless research commented, “While fieldbus solutions offer connection speeds that may be fast enough for certain applications, they do not offer a unified networking approach, such as with Ethernet technologies.” It’s not just unification which is an issue. Simplifying the network can reduce company overheads through an integrated system. This is difficult to achieve with fieldbus technologies. Instead end users will usually have separate office IT divisions and a factory IT divisions. Ethernet adoption across a plant or factory provides a better environment for sharing information and a single division with responsibility for the overall network. The benefits of which are likely to be less downtime and lower overall cost.”

The future still is strong for fieldbus, with new connections still increasing year-on-year.  However, it is undeniable that industrial Ethernet growth will remain higher than that of fieldbus. IHS believes that within 10 to 15 years industrial Ethernet will be the dominant networking technology in industrial environments and almost all components will offer Ethernet connectivity as standard.

Long product lifecycles and conservatism in industry will maintain fieldbus in the near term but eventually it will be relegated to a supporting role. “With the reduction in adoption will likely come an increase in cost also, further fuelling the transition to industrial Ethernet”, said Moore.

“The World Market for Industrial Ethernet and Fieldbus Technologies – 2013 Edition” is now available. This includes extensive analysis of industrial Ethernet and fieldbus technologies.

Source: IMS Research (acquired by IHS, Inc.)

- Edited and posted by Control Engineering, CFE Media; see other automation research results.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.