Hybrid geothermal system considerations

Install a hybrid geothermal heat pump system and reduce the cost of implementing geothermal heating and cooling on your building project. A hybrid system reduces the peak capacity of your ground loop, letting you install a smaller, less expensive ground heat exchanger.

08/29/2011


The Energy Center of Wisconsin with assistance from the University of Wisconsin Solar Energy Laboratory collected a year of operating data on three working hybrid system installations to analyze the economic and environmental impact of the hybrid approach and to compare it to other HVAC system designs. This data was used to investigate what contributes to an effective hybrid design and to validate energy models of these systems.

The study was funded by the United States Department of Energy, Alliant Energy, and Madison Gas and Electric. As a result of this project the Energy Center developed documents and tools for HVAC system designers to use, including a freeware version of their model, to assess the benefits of applying the geothermal hybrid approach on building projects. 

Free software models hybrid geothermal systems

A new tool developed by the Energy Center and UW Solar Energy Lab fills a gap for engineers and designers by modeling hybrid systems that can lower the up-front costs of geothermal. The free modeling tool can be used for the following:

  • Determine how much money a building owner can save by choosing a hybrid geothermal system.
  • Select optimal sizes for the equipment in a hybrid system.
  • Compare different hybrid geothermal approaches in terms of energy and economics for a given building project.
  • Analyze the effects of different control strategies for your geothermal or hybrid system.

- Edited by Chris Vavra, Consulting-Specifying Engineer, www.csemag.com 



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Big plans for small nuclear reactors: Simpler, safer control designs; Smarter manufacturing; Industrial cloud; Mobile HMI; Controls convergence
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.