IEC approves WirelessHART as first international wireless standard for process automation

Final IEC vote confirms broad global acceptance of WirelessHART by end users and suppliers, says HART Communication Foundation.

04/07/2010


P+F introduced these WirelessHART components in September 2009. See other WirelessHART products and news .

P+F WirelessHART devices

P+F is launching its WirelessHART device line, using the system's interoperability to work with other manufacturers.

International Electrotechnical Commission (IEC) approved the WirelessHART specification as a full international standard (IEC 62591Ed. 1.0), according to the HART Communication Foundation on April 6. The unanimous vote on 26 March 2010 by the IEC National Committees of 28 countries confirms the broad global support for WirelessHART technology as the international standard for wireless communication in process automation, the HART organization said.

 

 

"The overwhelming approval by IEC fulfills the request of users for a single international wireless communication standard that is supported by major automation suppliers," says HART Communication Foundation executive director, Ron Helson. "WirelessHART technology has been confirmed by both users and suppliers to be a technically sound, reliable and secure solution for wireless communication in process automation."

Suppliers of WirelessHART compatible products include ABB, Emerson, Endress+Hauser, Pepperl+Fuchs, Siemens and others

Released in September 2007, WirelessHART is an open and interoperable wireless communication standard designed to address the critical needs of industry for reliable, robust and secure wireless communication in real-time industrial process measurement and control applications, HART Communication Foundation says. WirelessHART is a backward compatible, evolutionary enhancement to the HART Communication Protocol, the leading communication technology for intelligent process measurement and control field devices and systems with more than 30 million devices installed and operating in process plant applications around the globe, the organization explains. www.hartcomm.org

Also read:- Backward compatibility vs. future proofing ;

- News and comment: Can WirelessHART and ISA100 converge? from March 31 2010; and
- Wireless: Converge ISA100.11a with WirelessHART? from May 27, 2008.

- Edited by Mark T. Hoske, editor in chief, Control Engineering , www.controleng.com.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Big plans for small nuclear reactors: Simpler, safer control designs; Smarter manufacturing; Industrial cloud; Mobile HMI; Controls convergence
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.