IMS Report: Rapid growth seen in industrial PC market

Factory automation increases will drive worldwide growth rate of 75% by 2015

12/11/2011


The world market for industrial PCs could reach $3.52 billion by 2015, according to a new report from IMS Research. That would be a 75% increased from the current IPC market of $2.07 billion.

The world IPC market was hit very hard by the global recession. The 2010 IPC market rebounded strongly; with all regions and sectors registering strong growth as projects that had been postponed came back on line and IPC distributors and users replenished stock.

Report author Mark Watson talked with CFE Media about how market factors in manufacturing, specifically factory automation, would impact the overall market going forward:

CFE: The report notes much of the growth in the industrial PC market is in areas outside of factory automation. What is the prospect in this market by itself, especially in the developed markets?

Watson: At a world level the factory automation sector is forecast an annual average growth rate of about 9% to 2015, which is below the rates projected for the sectors mentioned in the release. However, due to the large size of the initial market (almost 50% of total IPC sales revenue in 2010), the factory automation sector will see good revenue growth over the forecast period.

CFE: The growth of automation in emerging markets will mean a growth in industrial PC use. What are some of the barriers to growth in these markets?

Watson: Adoption of competitive solutions such as PLC + operator terminal, embedded computer boards and (rugged) mobile devices may all negatively impact on future IPC revenue growth. At present the economic uncertainty and strict lending mean that some projects cannot get funding, which also will impact automation component markets.

CFE: Is the definition of industrial PC expanding to include new technologies such as tablets and smartphones?

Watson: Within the IPC report we do not include any rugged mobile computers or consumer devices that are used in a harsh environment. We are looking to do a separate piece of research on this market late in 2H12.

CFE: Which area in the industrial PC market seems to get the most attention: information display, data management or integrated control? Which area seems to be driving new equipment or replacement purchases?

Watson: As system performance increases and relative prices decrease it seems that IPCs are being used for multiple functions and are especially well suited for integrating the factory network with the enterprise network. Data can be easily gathered, analyzed and distributed so that accurate info is available at all levels of the organization. Multi-core processors and hypervisors are being used to run different apps simultaneously. Widescreen displays are also being used to display more data (for multiple apps) at the same time. IPCs are being used more for machine control but the PLC still dominates this application. More likely, going forward, PLCs and IPCs will be used alongside each other.

IMS Research

www.imsresearch.com



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.