IN DEPTH: High growth for low harmonics

IMS Report: Power quality issues seek a common standard as emerging economies wrestle with the issue.

06/14/2011


To view a larger version of the included graph, click the PDF at the bottom of the page.

The Asia Pacific region for low harmonic solutions is poised for 2011 growth of 17.8%, according to a new market report, The World Market for Regenerative Drives and Low Harmonic Solutions from IMS Research. China in particular will grow across many different industry sectors, unlike other developed countries that focus harmonic standards on specific industries, such as water & wastewater and commercial HVAC.

“Asia Pacific is the largest regional market for harmonic filters, representing 41.4% of sales in 2010, due to the region’s poor power quality in relation to Europe and to a lesser extent the United States,” comments IMS Research analyst Sarah Sultan.

In an interview with CFE Media, Sultan takes a deeper look at the issue of harmonics, and what global manufacturers will face in the absence of a single global standard:

CFE: Why is the problem of poor harmonics such a big problem in China and other emerging manufacturing markets?

Sultan: Poor harmonics is a big problem in China due to the enormous amounts of industrial usage, a lot of it dependent on heavy equipment which introduce harmonics. In general, China will not upgrade their current power grid, but rather build entirely new distribution infrastructure. 

CFE Media: Power quality has become a critical issue in many regions because of the high dependence on automation equipment. Both regionally and globally, how would you rate plants’ understanding of this problem?

Sultan: Plants’ understanding of this problem varies quite significantly by region. In developed regions, there tends to be less of a focus on harmonics for individual plants unless a larger internal problem arises due to harmonics. Developing regions are enforcing stricter guidelines across industry, making factories much more conscious of the problem. In all regions, focus on harmonics is becoming a greater issue and will continue to become more important in future.

CFE: The Smart Grid continues to be a topic of conversation. How does the issue of harmonics play into that debate?

Sultan: Harmonics and other power quality issues are drivers for the market for Smart Grid technologies. Electricity grids are having greater demands placed on them now as distributed generation and electric vehicle charging begin to draw upon aging electrical utility infrastructure. As harmonic issues mount, installing Smart Grid technologies, including advanced metering, distribution automation, and power quality management equipment becomes more important.

These technologies can enable the utility company to measure power quality at many points throughout the grid, pinpointing sources of harmonic distortion and working with industrial energy users to minimize power quality issues. In some regions, utilities are motivated to provide greater power quality through fees and penalties, and in turn these utilities demand more community-minded power usage from their industrial customers, driving increased concern for power quality at the industrial level.

CFE: The research also looks at the adoption of U.S. and European electrical standards. How are the two different? Do you see a time where those standards may become – pardon the expression – harmonized?

Sultan: The US harmonic standard (IEEE 519) focuses on the point of common connection rather than the input to the plant. The key point is that harmonics are only an issue in the U.S. at the point in which they affect other users. This tends to be a problem in industries that are close to the consumer power grid, such as commercial HVAC and water & wastewater. European standards focus on the input to the plant, so individual factories must be conscious of their harmonic content. In addition, European power grid quality is higher than that of the U.S., creating fewer problems to begin with.

In my opinion, I don’t see these standards becoming uniform worldwide. One reason is the U.S. market – the U.S. market handles harmonics at a utility level, and in comparison to many other regions has not been very concerned about harmonics. IEEE 519 is a guideline, and is not strictly mandated unlike other regions.

In addition, individual utility companies, of which there are thousands, handle harmonic problems with users very differently at the moment. IEEE-519 is in their bylaws and requirements, but they only enforce it when someone causes a violation. The U.S. harmonic standards would need to become uniform before possibly considering an international harmonization of standards.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.