IR sensor for packaging coated products

The Reflectance Infrared Spectrometer from Honeywell uses proprietary array detector technology, designed to help reduce defects and amount of raw materials used.

11/11/2010


Honeywell has introduced new infrared-sensing technology designed to help packaging makers significantly reduce defects in their coated products, as well as reduce the amount of raw materials used to produce them. The Reflectance Infrared Spectrometer (RIS) uses proprietary array detector technology to provide the industry’s highest resolution and the broadest IR spectrum range, which allows mills to achieve unsurpassed quality by measuring multiple components of coatings, even on reflective or printed substrates.

RIS can be used in quality control systems like Honeywell’s MXProLine, which uses an array of scanners and sensors to monitor the quality of coated products such as liquid and aseptic packaging. The total solution helps producers more accurately measure and control multi-layer or barrier coatings and adhesive layers, discriminate components with very similar spectral characteristics, measure on printed and reflective backings, and quantify variations in additives and fillers such as Ti02 and CaC03.

“Like most manufacturers, packaging makers are not only facing increasingly complex product requirements, but also demands for lower production costs and higher productivity,” said Jack Ross, global business leader for P3 and CWS. “The Reflective Infrared Spectrometer brings those manufacturers closer to this objective and represents the industry’s move to increasingly sophisticated digital signal-processing technology that improves accuracy, resolution and flexibility.”

Specific features of the RIS include user friendly online graphical calibration tools, which save significant time over the off-line calibration methods employed by spectrometer-based sensors. Operators can choose between a basic ratiometic calibration or advanced chemometric calibration when measuring complex or multi-layered products. Additionally, RIS features internal optics that optimize beam focusing, automatic standardization that corrects for any drift in source spectrum or detector response, and fast response for high-resolution and precise spatial alignment.

Honeywell International

www.honeywell.com

 


- Edited by Amanda McLeman, Control Engineering, CFE Media, www.controleng.com



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.