ISM data showed manufacturing accelerated in Dec. 2011

PMI jumped to 53.9% in latest survey, finished 2011 on the upswing.

01/05/2012


Economic activity in the manufacturing sector expanded in December for the 29th consecutive month, and the overall economy grew for the 31st consecutive month, say the nation's supply executives in the latest Manufacturing ISM Report on Business.

This table shows the fluctuation in the purchasing managers index (PMI) from Jan. 2011 to Dec. 2011. Courtesy: ISM ReportThe purchasing managers index (PMI) registered 53.9%, an increase of 1.2 percentage points from November's reading of 52.7%, indicating expansion in the manufacturing sector for the 29th consecutive month. The New Orders Index increased 0.9 percentage points from November to 57.6%, reflecting the third consecutive month of growth after three months of contraction.

Prices of raw materials continued to decrease for the third consecutive month, with the Prices Index registering 47.5%, which is 2.5% age points higher than the November reading of 45%.

Manufacturing is finishing out the year on a positive note, with new orders, production and employment all growing in December at faster rates than in November, and with an optimistic view toward the beginning of 2012 as reflected by the panel in this month's survey,ā€ said Bradley J. Holcomb, chair of the Institute for Supply Management Manufacturing Business Survey Committee.

Manufacturing continued its growth in December as the PMI registered 53.9%, an increase of 1.2 percentage points when compared to November's reading of 52.7%. A reading above 50% indicates that the manufacturing economy is generally expanding; below 50% indicates that it is generally contracting.

A PMI in excess of 42.5%, over a period of time, generally indicates an expansion of the overall economy. Therefore, the PMI indicates growth for the 31st consecutive month in the overall economy, as well as expansion in the manufacturing sector for the 29th consecutive month.

"The past relationship between the PMI and the overall economy indicates that the average PMI for January through December (55.3% ) corresponds to a 4.5% increase in real gross domestic product,ā€ said Holcomb. ā€œIn addition, if the PMI for December (53.9%) is annualized, it corresponds to a 4% increase in real GDP annually."


Edited by Amanda McLeman, Managing Editor, Plant Engineering.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches ā€“ written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.