ISO 13849-1 Machine Guarding Adoption, Part 4 - safety standard merger

Adopting EN ISO 13849-1 by Dec. 31, 2011 has been taking a lot of attention this year particularly for manufacturers of machinery and global end users. Guess what? The IEC (International Electrotechnical Commission) world and the ISO (International Standardization Organization) world are voting to merge EN ISO 13849-1 and IEC 62061. Yikes – when will “Safety of Machinery – Safety Functions of Control Systems” settle down?

09/24/2011


Adopting EN ISO 13849-1 by Dec. 31, 2011 has been taking a lot of attention this year particularly for manufacturers of machinery and global end users. Guess what? The IEC (International Electrotechnical Commission) world and the ISO (International Standardization Organization) world are voting to merge EN ISO 13849-1 and IEC 62061. Yikes – when will “Safety of Machinery – Safety Functions of Control Systems” settle down?

   We been talking about a lot of new approaches, terminology, and considerations for industry faced with the compliance requirements integral to the adoption of ISO 13849-1 by Dec. 31, 2011. For many companies this will be a paradigm shift within their organizations but one that offers increased safety and fewer injuries for industry’s most valuable resource – the employee. We’re still fairly early in the learning and adoption curves for this full transition to designing in and compliance with these functional safety requirements. When will this potentially merged standard be completed and how will it affect Industry? This is the million dollar question!

   Have any of you heard about this? Do you have any ideas on how this might affect your responsibilities or your business? Please let us know by providing your comments below.

   Briefly, in my opinion, the potential merger of 13849-1 and 62061 could be another significant advancement in machine guarding and functional safety of control systems. The NWIP (New Work Item Proposal) submitted by France is out for vote within IEC and ISO. Once approved a joint working group is formed and their activities and time schedule is defined for completion. The amount of work for this kind of effort I believe is substantial and completion could take four years. The new EN ISO 13849-1 was originally given a two year transition to take the place of EN 954-1 but experienced two extensions. Possibly this merged standard will also be awarded a two year phase in also which could place the compliance date in six years or roughly 2018. If it happens is seven years enough time to get ready?

   As for the second question, I believe the affect on your responsibilities or your business could be slight and positive. In 30,000 foot language I believe this is because 62061 does a great job of covering the more complex components of the control system (like safety PLC’s, safe motion, etc.) and 13849-1 does a great job of addressing the less complex components of the control system (like safety interlock switches, safety relays, etc.). Both of these standards use mathematically derived safety circuit design methodologies to determine safety levels of compliance and hazard mitigation. Surely, by 2018, industry should have enough experience using these standards to achieve safety compliance that adoption of the merged standard should be straight forward. The gotcha is of course – innovation. For the past ten years we’ve been it a fast paced cycle of safety automation innovation.

   What new technologies will automation suppliers bring to the market adding a third dimension to this question over the next 10 years?

   Your comments or suggestion are always welcome so please let us know your thoughts. Submit your ideas, experiences, and challenges on this subject in the comments section below. Click on the following text if you don't see a comments box, then scroll down: ISO 13849-1 Machine Guarding Adoption, Part 4.

   Did you see the Safety Integration Webcast?

   Related articles:

ISO 13849-1 Machine Guarding Adoption, Part 1

ISO 13849-1 Machine Guarding Adoption, Part 2

ISO 13849-1 Machine Guarding Adoption, Part 3

EN ISO 13849-1; 2008 – Are We Ready By December 2011?

Cover story: Machine Safety Integration

Trouble Implementing ISO 13849-1; 2006 per the European Machinery Directive

Contact: www.jbtitus.com for “Solutions for Machine Safety”.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.