Level switch with no moving parts

Device detects liquids and dry substances with short response time.

08/13/2010


Baumer LBFS level switch seriesBaumer has released its new LBFS level switch series, which the company says is a cost-effective and reliable alternative to vibration level switches. The device is able to detect viscous or dry substances as well as liquids, and can be mounted in any position in tanks or pipelines. The sensor is unaffected by flow, turbulence, bubbles, foam, and suspended solids. With a small and smooth sensor head, even adhesive media do not stick to it.

Baumer suggests many appropriate applications and industries, including high and low levels in tanks and pipelines, overfill protection, dry running protection of pumps, and phase separation in oil-water mixtures. Its corrosion-resistant housing can be installed through a pipe or vessel wall using a threaded hole and appropriate sealant. Response time is 0.2 seconds so it can be used in fast filling processes. The operating temperature range is -40 to 115 °C.

-----------------------------------------------------------------------------

 

40 Under 40 – Control Engineering: Know someone working in automation under age 40 in need of some recognition? See the 40 Under 40 awards.

-----------------------------------------------------------------------------

The LBFS transmitter sweeps a frequency range which becomes subject to a phase shift depending on the medium. When in contact with the medium, which has a dielectric constant outside a selected range, an electronic switch is triggered. The high sensitivity over a sensing range of dielectric constants from 1.5 to >100 allows detection of all kinds of powders, granulates, and liquids. Baumer says that even difficult substances like polyamide granules or paper can be detected reliably. This compares favorably to other measuring methods like vibrating forks, conductive ultrasonic, or optical sensors. The LBFS series has no moving parts and is not sensitive to changes based on conductivity, temperature, or pressure.

Edited by Peter Welander, pwelander(at)cfemedia.com
Control Engineering

Visit the Control Engineering Process Control Channel.




No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.