Light curtains pick to light for error-free shelf control

Wenglor sensoric light curtain uses a pre-mounted reflector foil attached to the back of the sensor´s housing to reduce the efforts for installation and wiring, reduce the initial start-up costs, and reduce search time.

06/24/2011


With its Light Curtains Pick to Light the sensor producer wenglor extends its portfolio of Photoelectronic Sensors. According to the principle "Pick to Light" (commissioning with light) the Light Curtains monitor the correct parts picking processes in shelves and storage locations during mounting and commissioning and thus effectively prevent errors. By using the Light Curtains Pick to Light search times are substantially reduced and productivity is increased. The Light Curtains function according to the retro-reflex principle, meaning that transmitter and receiver are integrated into the same housing and need a reflector in order to function. The practical thing about this: on wenglor´s Light Curtains a reflector foil is already pre-mounted to the back of the sensor´s housing and serves as reflector for the neighboring Light Curtain. This reduces the efforts for installation and wiring and reduces the initial start-up costs.

An integrated two-color job display (green/red) indicates a correct respectively incorrect parts picking process to the user. It is clearly visible at a 360-degree radius to the user and makes a diagnosis possible even when the actual control panel is not visible. The job display can be switched over from blink mode to shine mode, and the output can be switched over from NO to NC. The respective configuration of functions is done with the push of a single button via the Teach key. The Light Curtains in their robust aluminum housings work with visible red light and ensure a range of 2,000 mm. With metering panel heights of 120 mm, 270 mm and 420 mm and a beam spacing of 30 mm the Light Curtains are suited for the use in storage locations as well as for commissioning tasks in the logistics and automotive industries.

Wenglor sensoric gmbh has headquarters on Lake Constance in Tettnang, Germany,  manufacturers contactless object detection.

www.wenglor.com

www.controleng.com/sensors

Did you see the Sensor Channel? www.controleng.com/sensors



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.