Low-power architecture helps wireless sensing

Powercast Lifetime Power Wireless Sensor System broadcasts RF energy to power wireless sensors without batteries or wires up to 80 ft away from the transmitters.

04/29/2011


Powercast Lifetime Power Wireless Sensor System broadcasts RF energy to power wireless sensors without batteries or wires up to 80 ft away from the transmitters.Powercast Lifetime Power Wireless Sensor System for environmental monitoring in HVAC control and building automation broadcasts RF energy to power wireless sensors without batteries or wires. In the wireless powering system, receivers embedded inside the sensor nodes receive RF energy up to 60-80 ft away from the transmitters. Receivers then convert the RF energy into dc current to power the sensors wirelessly.

Broadcasted RF energy can reach and power sensors even through walls, above ceilings, and behind objects, and provides a reliable energy source as opposed to pure ambient energy-harvesting technologies such as indoor solar, thermal, or vibration.

It uses battery-less sensor nodes embedded with Powercast Powerharvester receivers, a WSG-101 Building Automation System (BAS) Gateway, and a Powercast TX91501 Powercaster transmitter.

The first available sensor is a temperature and humidity sensor, to be followed soon by sensors to measure CO2, pressure, light, and motion.

Powercast transmitterThe BAS gateway can scale up to 100 sensor nodes and 800 sensor points, interfaces to wired BAS networks via industry-standard protocols (BACnet, Modbus, Metasys, and LonWorks) and communicates wirelessly at 2.4 GHz using IEEE 802.15.4 radios.

Powercast developed the system using RF transmitter and receiver energy-harvesting technology, and the other devices in its P2110-EVAL-01 Energy Harvesting Development Kit for Wireless Sensors. The receiver embedded in the sensor nodes is based on Powercast’s P2110 Powerharvester receiver, available for OEMs to design into products. 

www.powercastco.com

www.powercastco.com/products/wireless-sensor-system/

www.controleng.com/wireless



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.