Machine Safety: A new international standard for interlocking devices on guards – ISO 14119: 2013

Have you had unintended consequences of a “temporary defeat” or bypassing guard interlocks? Just-updated ISO 14119 “Safety of machinery – Interlocking devices associated with guards – Principles for design and selection" may help.

12/01/2013


Have you experienced any unintended consequences of a “temporary defeat” or bypassing guard interlocks? ISO 14119 “Safety of machinery – Interlocking devices associated with guards – Principles for design and selection" has just been updated and could help mitigate these issues.

A Type B standard, ISO 14119: 2013 updates the previous 1998 edition and harmonizes EN 1088 into one international standard. This update expands original considerations to include additional technologies like RFID and electromagnetic guard locking. It also expands classifications for interlocking devices and provides additional requirements/specifications for installation. Extra care is provided for protection against manipulation of devices and guards in a reasonably foreseeable manner. However, you might find that trapped key systems are not fully addressed in your evaluation and you might find other application standards more helpful like; ISO 13849-1, IEC 62061 or ANSI B11.19.

Generally speaking risk assessments will identify hazards such that when a safety gate is opened, hazardous machine movements must be stopped or reduced to a safe slow speed. The same safety function could also apply to various removable guards, access doors and other points of entry into hazardous situations where interlocking devices are applied. Safety experts are always paying special attention to all precautions, training, signage and engineering methodologies to mitigate hazards to acceptable levels. In my opinion, we should always strive to reduce the possibility to defeat or manipulate all guards maximizing safeguarding levels.

Recently a blog post discouraged the defeating of safety interlocks. At the same time ISO 14119: 2013 for interlocking devices was published and is a positive step in this direction.

Has this presented you with any new perspectives? Do you have some specific topic or interest that we could cover in future blog posts? Add your comments or thoughts to the discussion by submitting your ideas, experiences, and challenges in the comments section below.

Related articles:

Machine Safety: Discourage the defeating of safety interlocks

Machine Guarding & The Hierarchy of Measures for Hazard Mitigation

Machine Safety – serious machine guarding issues!

ASSE - Professional Safety Journal- Near-Miss Reporting, May 2013 

Contact: http://www.jbtitus.com for “Solutions for Machine Safety”.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.