Machine safety and your safety culture

How's your machine safety culture? Have you heard anyone say: My hand is quicker than the machine, production is more important than safety, we don't need machine guards because...

11/12/2010


In my last Machine Safety blog I suggested that there was an elephant in the room called “Safety Culture”! Furthermore, I suggested that quite often it’s the elephant in the room that looks over your shoulder to help make those difficult and gray decisions such as whether a hard guard is best for a given hazard.

Has anyone noticed that elephant yet?

Well, where do you think the “Safety Culture” elephant in the room comes from or if it even exists? In my opinion, a safety culture will always exist, even by its absence! This harsh reality is no different than realizing that “no decision is a decision.” Here are some common “Safety Culture” statements I’ve heard over the past several years:

  •    My hand is quicker than the machine
  •    Production is more important than safety
  •    We don’t need machine guards because we do it differently here
  •    We haven’t had an accident so we have a great safety program
  •    Our primary operators are trained every month so we don’t need LOTO

I hope none of these statements apply to your manufacturing operations or experience because they’re indicative of safety culture that’s probably about to have a serious accident. Under this safety culture, the question in my last blog would likely be to only provide the hard guard during production. And, for all the other 24/7 modes with the hard guard removed, perhaps no back-up guarding would be necessary as per the “Safety Culture.” In my opinion, it’s often the safety culture that answers the question, “has tolerable risk been achieved”? I call the above a negative safety culture.

On the other hand, a positive safety culture is one that typically is leadership driven, has a clear vision with expectations, and is accountable and measureable. Furthermore, I believe that a positive safety culture embeds a shared value concept among all employees and management built on a set of guiding principles for long term viability and sustainability. Principles like aligning safety management with reality by, for example, focusing on leading indicators like near hits vs lagging indicators like near misses. Yes, a positive safety culture can help drive employee satisfaction and increased profits.

With this brief analysis, who now has seen the elephant in the room?

Submit your ideas, experiences, and challenges on this subject in the comments section below. Comment box missing on your screen? Submit a machine safety culture comment here and scroll down.

Related articles:

Machine Safety – Hard Guarding Is Best – Right?

Updating Minds About Machine Guarding    

Contact: www.jbtitus.com for “Solutions for Machine Safety”



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.