Machine Safety: Can end user companies comply with ISO 13849-1: 2006 without design engineering resources?

ISO 13849-1: 2006, an international machine safety standard, is written for individuals who perform design responsibilities for control systems. What are end users responsibilities?

12/13/2012


ISO 13849-1: 2006 is an updated international machine safety standard intentionally written for individuals who perform design responsibilities for control systems. These responsibilities are specifically for the design of control systems for machinery and the safety-related parts of control systems. Okay, so what industry standard do end user companies reference to maintain and/or modify their installed safety-related parts of control systems?

 

Am I the only fly in the ointment?

 

By definition, in the Scope statement of ISO 13849-1 you’ll find:

 

This part of ISO 13849 provides safety requirements and guidance on the principles for the design and integration of safety-related parts of control systems (SRP/CS), including the design of software. For these parts of SRP/CS, it specifies characteristics that include the performance level required for carrying out safety functions. It applies to SRP/CS, regardless of the type of technology and energy used (electrical, hydraulic, pneumatic, mechanical, etc.), for all kinds of machinery.

 

As stated above, this international standard has targeted “designers and integrators” of the safety-related parts of control systems (SRP/CS). Obviously the writers of this standard transitioned the required approach for achieving functional safety from a qualitative methodology (Categories B, 1, 2, 3 &4 from EN 954-1: 1996) to a quantitative methodology (PL a, b, c, d & e). It is well documented that by achieving this goal the risk levels of ISO 13849-1 and IEC 62061 are exactly quantitatively comparable. Conversely, the qualitative risk levels of Categories could not mathematically compare with the quantitative SIL (safety integrity level) risk levels of IEC 62061. The lack of this ability had been a criticism of the Category methodology originated by EN 954-1 versus the SIL methodology of IEC 62061. Hurray for this international achievement!

 

In the U.S. we didn’t adopt EN 954-1 because the U.S. doesn’t adopt EN (European Norm) standards. However, we did adopt the qualitative methodologies of EN 954-1 and the Category methodology for risk levels. Additionally, U.S. industries have focused training efforts at small and medium sized companies to learn and adopt this qualitative approach to manage and implement their machine safety strategies. In many of these small and medium sized companies, oversight and implementation resources are not graduate design engineers. Yet, these companies can readily handle their responsibilities for maintenance and modification of safety-related parts of control systems using the qualitative methodologies of Categories. However, transitioning their requirements to the new quantitative methodologies of ISO 13849-1 may not be possible via in-house resources. So, how will these companies provide a safe working environment for their employees around machines when the supply channel converts to Performance Level (PL) versus Category (Cat) for certifying safety products?

 

We must remember that our OSHA laws enforce machine safety compliance to end user companies and not to designers and integrators. In Europe under the Machinery Directive legal compliance is enforced on the designers and integrators.

Are end user companies in the U.S. abandoned by a zeal to mathematically compare risk levels of hazards between two standards?

      

J.B. Titus, CFSEYour comments or suggestion are always welcome so please let us know your thoughts. Submit your ideas, experiences, and challenges on this subject in the comments section below.

 

Related articles:

Inside Machines: Does adopting ISO 13849-1:2006 change the U.S. model for compliance and enforcement?

Machine Safety – functional safety & the steps to be compliant in the US.

Machinery Directive In 4 Days Drops EN 954 and EN ISO 13849-1 Is Fully In Force – What’s Your Impact?

Is OSHA Rear View Mirror Enforcement?

Machine Safety: Is OSHA okay with my 'acceptable' risk mitigation?

 

 

Contact: www.jbtitus.com for “Solutions for Machine Safety”.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.