Machine Safety – does new technology create new hazards?

When NFPA 79 changed by removing requirements for hard wiring machine safety devices in 2002, many automation suppliers introduced new safety rated devices for machine guarding. Domestic standards also have updated requirements to provide direction for use of safety rated devices. Do the new devices represent new hazards, such as lighted emergency stop buttons?

11/07/2012


Jokab Safety giant E-Stop at Pack Expo 2010Since 2002, when NFPA 79 changed by removing requirements for hard wiring machine safety devices, we’ve seen automation suppliers introducing lots of new safety rated devices for machine guarding. Also since 2002, additional domestic standards have likewise updated their requirements to provide direction for use of safety rated devices. Don’t some of these new products introduce possibilities for new hazards? Take for example – lighted emergency stop buttons?

                                                                                                            

Just think for a moment about how a red mushroom button on a safety rated emergency button might work if the red palm button lights up when it’s been activated? Wow, if that’s how it works, the lighted red palm button would surely differentiate it from other red buttons on any operator panel. Right? Has anybody already used any of these devices? Is this how they all work? Or, do lighted emergency stop buttons all work the same way? Aren’t they all regulated by industry standards?

 

Let’s see? For the design and testing of emergency stop devices we have IEC 60947-5-5:2005, Control circuit devices and switching elements – Electrical emergency stop device with mechanical latching function. This standard provides detailed specifications relating to the electrical and mechanical construction of emergency stop devices with mechanical latching function and their testing. For applications of emergency stop devices we have NFPA 79 – 2012, Electrical Standard for Industrial Machinery, ANSI B11.19 – 2010, Performance Criteria for Safeguarding, ISO 13850:2006, Safety of machinery -- Emergency stop -- Principles for design, and IEC 60204-1:2005, Safety of machinery – Electrical equipment of machines. All four of these standards regulate the applications of emergency stop devices in machine control systems. Only IEC 60947-5-5 regulates the design, build and test of an emergency stopping device, however, I don’t believe it addresses the design/application of a lighted button.   

So, if we have a lighted button in a safety rated e-stop device is the light function part of the safety rating? Why is this important? Well, if the device is applied in a Cat 3 or 4 (EN 954) safety circuit does the light need to be redundant in the event the first bulb burns out? Is it a safety critical hazard if the bulb doesn’t even work? Or, is the bulb’s only purpose to aid in reducing the trouble shooting time for resetting the device? Do all lighted e-stop devices from all suppliers function the same way regarding the light function? Can anybody help us out here? 

Do lighted button e-stop devices create a new hazard? 

Your comments or suggestion are always welcome so please let us know your thoughts. Submit your ideas, experiences, and challenges on this subject in the comments section below. Click on the following text if you don't see a comments box, then click into and scroll down in: Machine Safety: Does new technology create new hazards? 

J.B. Titus, CFSERelated articles:

ANSI B11.19-2010, Performance Criteria for Safeguarding

NFPA 79 – 2012, Electrical Standard for Industrial Machinery

E-Stops and Your Compliance

E-Stops Aren’t Safety Devices 

Contact: www.jbtitus.com for “Solutions for Machine Safety”.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.