Machine Safety: Is prevention through design enough?

U.S. consensus standards provide direction to suppliers on how to design in machine safety. Can users understand and comply with the additional requirements of ISO 13849-1?

02/18/2013


Prevention through design (PTD) has been a central theme of innovation for accomplishing machine safety in my view for at least the past decade. So, where does this concept reside today on the scale of idea through broad adoption?

I have had the privilege of knowing two industry experts for over 10 years, Bruce Main and Fred Manuele. These two gentlemen are strong industry leaders in the understanding, promotion, and implementation of PTD for machine safety. I have learned a lot about machine safety from both of them. The American Society of Safety Engineers (ASSE, www.asse.org) January issue of “Professional Safety” is largely devoted to the concept of PTD. 

In my profession I have been on the user and supplier sides of industry. As a seasoned industry expert, I readily understand and agree that a lot of attention needs to be focused at the design (supplier) side of industry. By doing so we accomplish moving machine safety from an afterthought, where safety is added to a machine on the manufacturer’s (user’s) plant floor, to a forethought, where safety is designed into the machine. Accomplishing this transition means that a user can actually purchase a (somewhat) safe machine, even though OSHA does not require a supplier to ship a safe machine.

Ah, this is the U.S. dilemma. PTD and our domestic consensus standards provide direction to suppliers on how to design in machine safety. Great!&nb

However, enforcement via OSHA is accomplished only by inspecting installed machines on a user’s plant floor. Machines being designed and manufactured by an OEM are not inspected by OSHA. Additionally, more influence comes to the U.S. via international standards, like ISO 13849-1, focused at helping designers with safety-related compliance requirements. Again, the supplier side! So who helps the user? Can users understand and comply with the additional requirements of ISO 13849-1? Do users have the qualified resources for design? 

In my opinion, it’s great that we’re focusing on suppliers’ requirements to improve machine safety. But, let’s not forget about users and how they’ll use the same standards to maintain their safety compliance.

Has this presented you with any new perspectives? Add your comments or thoughts to the discussion by submitting your ideas, experiences, and challenges in the comments section below.

 

J.B. Titus, CFSE

Related articles:

Inside Machines: Does adopting ISO 13849-1:2006 change the U.S. model for compliance and enforcement?

Machine Safety – does OSHA reference consensus standards for compliance?

Machine Safety: Is OSHA okay with my 'acceptable' risk mitigation?

 

Contact: http://www.jbtitus.com for “Solutions for Machine Safety”.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Big plans for small nuclear reactors: Simpler, safer control designs; Smarter manufacturing; Industrial cloud; Mobile HMI; Controls convergence
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.