Machine Safety: What do you mean the vice president said: So What?

After a two hour presentation in the conference room providing all the new high technology based machine guarding solutions and testimonials on operating cost savings, the vice president of operations said, “So what!”?

07/30/2012


After a two hour presentation in the conference room providing all the new high technology based machine guarding solutions and testimonials on operating cost savings, the vice president of operations said, “So what!”?

 

This is a reminder of the "Five Levels of Hazard Mitigation"

For review, the five levels of hazard mitigation are:

1.) Eliminate the hazard – design it out

2.) Isolate the hazard with hard guarding

3.) Add additional engineering, guards, devices, or layers of safety (controls or systems)

4.) Administrative controls like – training, signage, assessments, etc.

5.) Personal protective equipment (PPE) like - goggles, gloves, outer clothing, shields, etc.

 

In my opinion, industry most always wants to see a comprehensive solutions approach to their machine guarding issues. Over the past 40 years I’ve seen lots of machine guarding situations and most of them involved at least two or three of the above levels for mitigation. And, only a hand full of companies made corporate wide decisions to treat any and all identified machine guarding hazards with Cat 3 level solutions. With this said, what it means to one is not what it means to another.

 

This is why it’s so very important to think ahead about the “so what” question and address it up front.

 

How important do you think listening skills are? This is to say that different companies have different cultures. It’s been my experience that these cultures play a significant role in how different companies define their “acceptable” level of hazard mitigation. Understanding these dimensions provides an opportunity to evaluate the “Five Levels of Hazard Mitigation” and how they may be important to any one application and company. In my opinion, a solutions based resource needs to be proficient in all five levels to address the “so what” question. Otherwise, you risk presenting the gold-plated solution to a “crawl, walk, run” based company. A great balance sheet doesn’t guarantee that their ready to drive a Bentley.    

Your comments or suggestion are always welcome so please let us know your thoughts. Submit your ideas, experiences, and challenges on this subject in the comments section below. Click on the following text if you don't see a comments box, then scroll down: Machine Safety: What do you mean the vice president said: So What?

 

J.B. Titus, CFSERelated articles:

Machine Safety – is OSHA okay with my “acceptable” risk mitigation?

Safe or Safe Enough by John M. Piampiano and Steven M. Rizzo, Professional Safety, Jan., 2012

Machine Guarding & The Hierarchy of Measures for Hazard Mitigation

Machine Safety – how safe is safe enough?

Contact: www.jbtitus.com for “Solutions for Machine Safety”.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.