Machine Safety: Where do effective safety cultures roost?

An improved safety culture, advocated at the business level with engineering input, can bring about faster implementation of proven machine safety technologies, improving safety and adding economic value.

09/07/2012


An improved safety culture, advocated at the business level with engineering input, can bring about faster adoption of proven machine safety technologies, improving safety, and adding economic value. Courtesy: JB Titus & Associates

Sometimes, when new life rushes onto the factory floor via machine safety technology innovation, we have a “ta-dah” moment of realization about organizational effectiveness or the lack thereof!

 

There has been a very interesting discussion playing out on the LinkedIn Safety Automation Forum regarding safety cultures. This discussion was kicked off by Steve Ludwig (Rockwell Automation) and his highlighting of an article written by Cynthia Carroll, CEO of Anglo American plc, titled “The CEO of Anglo American on Getting Serious About Safety.” The discussion and article are, in my mind, centered around two very distinctive organizational camps I have witnessed in industry over the past 40-plus years. Those two camps are what I call “business talk” and “engineering talk.” And, most often it’s the business talk group which runs a company, establishes company vision, lays out the short and long term goals and objectives, and establishes the industrial safety policy. In other words, the business talk group follows top-down methodologies for running the business.

 

The engineering talk group is that part of the business that provides solutions and methodologies that implement the business talk. Engineering talk seldom sets or influences the setting of safety policy via bottom up approaches. However, they are the group usually most interested in innovative new ways to meet the corporate requirements established by the business talk within a company. With this said, it’s my opinion that the engineering talk camp generally will not engage in corporate wide adoption of innovative new safety technology by themselves. The engineering talk group is almost always the early adopter of new safety solutions but, as this graph illustrates, approximately 85% of the marketplace waits for company wide adoption before moving ahead. So, what’s the answer to facilitating earlier adoption?

 

The answer, in my opinion, is that a company’s business case for innovative new safety technology needs to be integrated with the business talk of a company. Only then do the executives of a company become aware of a paradigm shift in machine safety that improves productivity, reduces unplanned downtime and offers additional profits to the bottom line.

 

A recent Aberdeen Group study of more than 120 executives revealed that when executives understand that innovative new machine safety solutions are available offering opportunities for increased profitability – corporate strategies and safety policy begin to shift.

J.B. Titus, CFSE

 

A positive shift in safety policy occurs when I have witnessed a company’s “effective safety culture” in action, moving to company wide adoption of the new safety technology.

 

There are lots of opinions on this subject but it’s been my experience that truly effective safety cultures roost at the top. Johnson & Johnson is one of these companies emphasizing employee safety in the Johnson & Johnson Corporate Credo.

 

Your comments or suggestion are always welcome, so please let us know your thoughts. Submit your ideas, experiences, and challenges on this subject in the comments section below. Click on the following text if you don't see a comments box, then scroll down: Machine Safety: Where do effective safety cultures roost?

 

Related articles:

Designing In Machine Guarding

How To Integrate Safety

Safety Automation Forum

The CEO of Anglo American on Getting Serious About Safety

Contact: www.jbtitus.com for “Solutions for Machine Safety”.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.