Machine Safety: Where do I start?

“We are a medium sized business in manufacturing and our new owners are very interested in machine guarding and machine safety for our employees. Where do I start?” Eight tips follow for a machine safety and machine guarding.

06/20/2012


J.B. Titus, CFSE“We are a medium-sized business in manufacturing and our new owners are very interested in machine guarding and machine safety for our employees. Where do I start?”

 

There are literally thousands of companies with this background asking – where do I start? I believe that this question is largely driven by the following:

1.)  New management realizing the importance of machine safety to their business.

2.)  An understanding that recent revisions to machine safety standards offer opportunities.

3.)  Hearing pier chatter about a (new) Risk Assessment requirement.

4.)  Suppliers offering machine safety seminars on the above.  

 

I realize that there are a lot of additional details that need to be considered, however, many machine safety experts generally recommend these basic steps for better machine safety and machine guarding:

 

1.  Management needs to assign one executive with machine safety oversight responsibility.

2.  A team needs to be identified for implementation and execution of company safety policy.

3.  Gather all your machine safety standards, OSHA regulations, drawings, manuals, accident and/or maintenance history, etc.

4.  Conduct a plant-wide high-level machine guarding/safety assessment to establish hazard level priorities.

5.  Immediately install any fixed/moveable guards as necessary based on the above.

6.  Conduct machine specific risk assessments based on the priorities established above.

7.  Mitigate all identified hazards to acceptable levels.

8.  And, document the entire process.

 

The above are some general steps I believe most manufacturers can consider and adapt into their business operations. These activities generally can occur over time supplemented with training programs, PPE (personal protective equipment), warning signs, and other administrative programs and controls. OSHA incidents, injuries and accidents will certainly impact these suggestions on – where do I start?

 

Your ideas, experiences, comments or suggestion are always welcome so please let us know your thoughts. Submit your ideas, experiences, and challenges on this subject in the comments section below. Click on the following text if you don't see a comments box, then scroll down: Machine Safety: Where do I start?

 

 

Related articles:

Machine Safety – without an injury, OSHA issues citations for $1M +

We’re Safe – We’ve Had No Machine Safety Accidents For A Long Time

Machine Safety – does OSHA reference consensus standards for compliance?

 

Contact: www.jbtitus.com for “Solutions for Machine Safety”.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.