Machine Safety: Year over year safety automation growth outpaces general automation

Safety automation growth is outpacing growth in general automation. See these seven reasons and add your thoughts using the comment feature.

02/06/2014


Why is safety automation growth outpacing its parent – general automation? I see seven key explanations. I’ve been involved since safety automation came to market in 2002 so have been in the trenches seeing the year over year increase in safety automation growth.

I doubt that there is a single reason for this phenomenon. The contributing factors though can be understood by referencing this graphic I created for seminar discussion.

Safety automation for machine control graphic shows technology and reliability adoption over time, according to J.B. Titus. Courtesy: Control Engineering Machine Safety blogFrom this graphic let’s brainstorm some ideas on driving this growth phenomenon:

1. Compare the life cycles of general to safety automation. General automation is in its mature life cycle whereas safety automation is still in its rapid growth early adoption life cycle.

2. General automation users are “pulling” safety automation into applications.

3. Users are realizing that safety automation resolves many of the unplanned downtime issues and, as a result, drives growth in profits.

4. Original equipment manufacturers (OEMs) understand the advantages of diagnostics from safety devices and the reduced manufacturing costs of eliminating cable runs.

5. Control architectures are simplified via all machine control on single platforms.

6. Safety automation advantages have arrived at the C-level and CEOs are aware of the opportunity for business dynamics.

7. Machine safety is not compromised via safety automation. In fact, many argue that hazards can be mitigated to reduced levels with safety automation.

What are some of your brainstorming ideas or experiences? Please take a few minutes to list some of your thoughts to move this discussion. How about technology innovation, globalization, harmonization, etc.?

Has this presented you with any new perspectives? Do you have some specific topic or interest that we could cover in future blog posts? Add your comments or thoughts to the discussion by submitting your ideas, experiences, and challenges in the comments section below.

Related articles:

Machine Safety: Industry 4.0 and how it could impact machine safety

Machine Safety: System integrators report shortage of safety resources

Machine safety: Executives balance risks, profits

Machine Safety: Managing operational risk

Contact: www.jbtitus.com for “Solutions for Machine Safety.”



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Big plans for small nuclear reactors: Simpler, safer control designs; Smarter manufacturing; Industrial cloud; Mobile HMI; Controls convergence
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.