Machinery, systems networking with Sercos III and EtherNet/IP

First practical results of the machinery initiative, launched jointly by Sercos International, ODVA, and OPC Foundation, in April 2011, were announced at the 2012 Hannover trade fair.

05/04/2012


The first practical results of the machinery initiative, which was launched jointly by Sercos International, ODVA, and OPC Foundation in April 2011, were announced at the 2012 Hannover trade fair
   
“We are convinced that today's great variety of automation technology requires a new conceptual approach to simplify integration of machinery in manufacturing,” said Peter Lutz, Managing Director of Sercos international. “For this reason, we have cooperated with ODVA and the OPC Foundation in identifying topics that result in considerable technical and market synergies for users and providers.” 
   
Specifically, the deliberations focused on how to implement a joint network infrastructure in which the different network protocols can coexist and the devices of different manufacturers can be operated together. This approach is intended to support mechanical engineers and users in reducing the complexity and costs of device integration in machines and systems. It also enables mechanical engineers and users to select preferred product providers and to utilize their devices. 
   
Blended infrastructure with Sercos and EtherNet/IP devices, Courtesy: SercosBecause the infrastructure required for EtherNet/IP and Sercos III includes the physics and data link layers of Ethernet, Sercos telegrams, CIP messages and TCP/IP messages can coexist within a network without requiring additional cables. To keep the cyclical and clocked communication of Sercos III intact, the CIP messages and TCP/IP messages are transmitted in the Unified Communication Channel (UCC). This channel sits directly on the Ethernet layer without tunneling, allowing the connection of users who do not have Sercos III, but instead support a different Ethernet-based protocol. 
   
This approach allows the combination of Sercos III devices, EtherNet/IP devices and other Ethernet devices in a joint network infrastructure in a machine or system. The existing Sercos III and EtherNet/IP specifications do not have to be modified, as the respective communication mechanisms have already been integrated in the Sercos III transmission process. 
   
By late 2012, the providers aim to create an implementation guide that describes the planning and set-up of such multi-protocol networks. Initial prototypes are expected to be presented at the SPS/IPC/DRIVES 2012 show as a demo system.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.