Manufacturing's true leaders aren't waiting

As the world comes to Chicago in September for the 2012 International Manufacturing Technology Show, America has suddenly rediscovered manufacturing as a source of pride and admiration.

08/13/2012


As the world comes to Chicago in September for the 2012 International Manufacturing Technology Show (IMTS), America has suddenly rediscovered manufacturing as a source of pride and admiration.

Not that manufacturing went anywhere, of course. But as our industry has led the U.S. economy in its halting steps out of recession, it also has done so with a commitment to improving not just what we make, but how we make it. At a time when corporate leaders are sitting on piles of cash and the White House and Congress are sitting on their hands, manufacturing has charged forward.

In our world, we now live on minute-to-minute news cycles and an emphasis on speed and volume rather than accuracy and craftsmanship. News, as it turns out, is now manufactured in much the same way as the high-volume, low-quality products that triggered the whole outsourcing hysteria of the past few years. U.S. manufacturing, as it turns out, is winning the admiration of the globe today because it wouldn’t abandon the concept of accuracy and craftsmanship.

Consumers ultimately reject sloppy products, whether it’s a new car or a news story. American manufacturers took the opportunity to stake out the high ground on quality, and that effort has paid off. Not only are American products sought again, but foreign investors are bringing their jobs to the U.S. They want high-quality products produced by skilled workers. They have a choice on where to invest their money. They have chosen the U.S. worker in increasing numbers.

Even with this reality, though, the world of manufacturing continues to evolve. The borders of nations are more blurred than ever. Manufacturing is not just a national issue but a global one, dependent on a changing global economic landscape. The old expression, “If America sneezes, the world catches cold” is no longer strictly true. China’s sluggish growth, the eurozone’s continuing issues, and political instability in the Middle East have led us all to reach for the tissue box over the past year.

As the world comes to Chicago for IMTS in September, that’s all the more reason to understand manufacturing in a global context, not just as it applies to the U.S. Too many worry about whether jobs are insourced or outsourced; what’s really important is how U.S. manufacturers can figure out what their true market could be, and then deliver products that meet the market’s needs.

Some have chosen to wait until after the U.S. elections this November to make any further moves into the global market. There is a legitimate debate about what shape federal tax policy might take, but the real issues facing manufacturers don’t need government involvement. In fact, those who would argue we need less government seem to be the ones waiting for government to do something before taking action themselves. That seems especially counterintuitive. It certainly seems unprofitable.

The ones who are venturing out to look for new markets, or the ones venturing out to attract new investors in the U.S., or—as we highlight this month—the ones who are placing a bet on the workers and the markets by expanding their plants and their product lines in the U.S. and around the globe are the ones reaping the benefits. They’re not waiting around.

New products are coming into the marketplace from those who aren’t content to wait. New plants are going up around the country. New investments are made each day in the manufacturing infrastructure. The companies we highlighted in this issue all have one thing in common: They believe in their workers above all else.

If you can’t say the same thing, then you need new workers. If you have faith in your people and your process and your future, then you need to come to Chicago in September and participate at IMTS. See what in the world is going on.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.