Model-based design tools write control software for industrial equipment

Approached by a wind turbine manufacturer about a year ago, engineers at Rockwell Automation were asked, “Can you get ControlLogix to run C code?” Meanwhile, Matlab and Simulink software from The MathWorks Inc. was generating C, C++, VHDL and Verilog code from models, which would be run on PC-based control systems.

04/01/2010


Simulink PLC Coder from The  MathWorks lets users create model-based designs in Simulink (left) that  become IEC 61131-3 structured text at the touch of a button (center).  RSLogix takes that text and produces executables for machines controlled  by Rockwell Automation PLCs.

Simulink PLC Coder from The MathWorks lets users create model-based designs in Simulink (left) that become IEC 61131-3 structured text at the touch of a button (center). RSLogix takes that text and produces executables for machines controlled by Rockwell Automation PLCs.

Approached by a wind turbine manufacturer about a year ago, engineers at Rockwell Automation were asked, “Can you get ControlLogix to run C code?” Meanwhile, Matlab and Simulink software from The MathWorks Inc. was generating C, C++, VHDL and Verilog code from models, which would be run on PC-based control systems. Following a few months of integration and negotiation between the companies, The MathWorks developed a tool to transform its model-based designs into code for programmable logic controllers (PLCs) called Simulink PLC Coder.

 

 

The MathWorks software is used to design, simulate, test and validate complex mechatronic systems built on PC-based controls. Development involves creating models that capture electrical, mechanical, controls and process parameters in block diagrams and algorithms that show the interrelationships. As the models are run, the software creates plots and captures data that generates code for algorithms, and also generates code for test cases. This lets machine builders test and validate system design before generating executable code for a specific hardware platform, such as microcontrol units (MCUs) and field programmable gate arrays (FPGAs).

 

The MathWorks doesn’t handle the executable code portion of the process. “We don’t produce compilers,” said Tom Erkkinen, Simulink PLC Coder product manager for The MathWorks, “so we needed Rockwell to get us to the hardware. PLCs are a unique animal, but given our software architecture, it was fairly easy to leverage our coder for a new language. That means it’s not a version 1 coder. Its roots go back to 1992.”

 

The hardware, in this case, is ControlLogix PACs using RSLogix 5000 software. Simulink PLC Coder takes the Matlab or Simulink algorithms and generates IEC 61131 structured text (ST). RSLogix 5000 takes ST and produces an executable for the PLC. “It also produces 'hooks’ that link back to the algorithms, which show that the model matches the executable code generated, as well as [produces] code for test cases,” said Weber. “Once in RSLogix, I can compare test case results. Now I know that what I implemented matches my model.”

 

Benefits of such model-based design include:

 

  • Speeds design, testing, improvement, implementation, deployment, and upgrade of any PLC-based machine, cutting out many duplicative steps along the way.

  • Preserves engineering and intellectual assets as information flows from individuals or departments involved with design, simulation, testing, and engineering/operations;

  • Saves money by identifying and addressing design flaws or coding errors earlier in the process.

  • Builds in validation steps as design progresses, especially useful for high-speed machine applications;

  • Lets machine builders do design iterations in hours rather than days;

  • Eliminates documentation time, as the software automatically generates documentation;

  • Allows library creation for faster designs later, or improvements on current design more quickly and simply (matrix multiplication can be done in one or two lines of code in Matlab versus 100 or 200 lines of code in C or ST);

  • Can port model-based simulations to other targets in other languages (such as C and HDL) using related tools;

 

The Rockwell/MathWorks agreement is the latest in a series of Rockwell Automation software supplier partnerships. Other partnership companies include Dassault Systemes and ePlan.

 

www.rockwellautomation.com

 

www.mathworks.com

 

 

 



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.