NASCAR driver, an engineering major, appreciates high technology, charity donation

Vecoplan donated to a NASCAR effort that aims to deliver 500,000 lb of food and supplies to families in U.S. racing communities; the driver, an engineering major, and team owner of the #23 Vecoplan Ford Mustang toured a Vecoplan plant and noted appreciation for its high-tech biofuel and bioenergy products.

07/11/2013


Harrison Rhodes, driver of the Rick Ware NASCAR race team #23 Ford Mustang, visited the Vecoplan headquarters and manufacturing in High Point, NC. In this manufacturing bay, Vecoplan employees interact with the car and crew. Courtesy: Vecoplan LLCVecoplan, provider of technologies for processing waste into biofuel and bioenergy feedstock, sponsored car #23 at the NASCAR Nationwide “Feed the Children 300” on June 28 at Kentucky Speedway. Race team members toured a Vecoplan plant and expressed appreciation for engineering technologies applied there. The race was sponsored by Feed The Children, and through a partnership with Speedway Children’s Charities, Feed The Children will deliver 500,000 pounds of food and supplies to families in U.S. racing communities. The #23 Vecoplan Ford Mustang was fielded by Rick Ware Racing and driven by Harrison Rhodes, an engineering major.

The Monday after the race, Harrison Rhodes, Rick Ware, and other members of the race team brought the #23 car to Vecoplan’s headquarters and manufacturing plant in High Point, NC. After answering questions, Harrison and other members of Rick Ware racing toured Vecoplan’s test lab, engineering departments, manufacturing plant, parts and service departments, and offices.

As an engineering major at NC State University, Rhodes took special interest in Vecoplan’s two engineering departments, product engineering and engineering project management, expressing interest in the large Vecoplan engineering staff. Rhodes, noting appreciation for Vecoplan products and support, said: “The shredders they design for recycling, plus the size and sophistication of the systems they engineer and build for turning waste into a fuel, are truly impressive.”

Vecoplan, which provides technologically advanced machinery and systems for the processing of waste, designs, engineers, manufactures, installs, and provides start-up training on, as well as ongoing parts and service for complete systems used to prepare and feed municipal solid waste (MSW) for use: as alternative fuel in the production of heat and power, as a feedstock for pelletizing, and as a feedstock for conversion to syngas, methanol, cellulosic ethanol, biodiesel, and other liquid biofuels. Vecoplan also has experience with tires, wood, biomass, carpet, and other industrial wastes. Stated capabilities include unloading of raw feed-stocks, pre-shredding, ferrous separation, conveying, screening, air classification, re-shredding, non-ferrous separation, optical separation, testing stations, storage, and metered feeding to the boiler, to the pelletizing machinery, to the liquid fuel conversion system, or to other waste conversion technologies.

According to Len Beusse, COO – Vecoplan LLC, “This race was the perfect opportunity for Vecoplan. We’re located in the south, the birthplace of NASCAR, our subsidiary Vecoplan Midwest is about 30 minutes from Kentucky Speedway, we’re neighbors with the fine folks at Rick Ware Racing, Harrison Rhodes is not only an up and coming driver but also a young Christian man of character and integrity, and our company mission ‘Technology for a Sustainable Tomorrow,’ ties in perfectly with ‘Feed The Children 300,’ after all the reason we strive for a sustainable tomorrow is for our children.”

www.VecoplanLLC.com

- Edited by Mark T. Hoske, content manager CFE Media, Control Engineering, Plant Engineering, and Consulting-Specifying Engineer, mhoske(at)cfemedia.com.

ONLINE

See more photos from NASCAR visit at this Vecoplan LLC manufacturing site.

See more below from Control Engineering about the VIC/HMI control panel from Vecoplan.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.