Offshore energy development lab

There is now a research facility that could help bring the U.S. closer to generating power from the winds and waters along America’s coasts and help alleviate a major hurdle for offshore wind and ocean power development.

02/08/2013


ISS SourceThere is now a research facility that could help bring the U.S. closer to generating power from the winds and waters along America’s coasts and help alleviate a major hurdle for offshore wind and ocean power development.

The Reference Facility for Offshore Renewable Energy can test technologies such as remote sensing designed to determine the power-generating potential of offshore winds and waters, according to Will Shaw, an atmospheric scientist at the U.S. Dept. of Energy’s (DoE) Pacific Northwest National Laboratory (PNNL).

Research at the facility will help verify the technologies can collect reliable data and help improve those technologies. This knowledge provides potential investors confidence when reviewing offshore development proposals. Questions about the accuracy of offshore data from new measurement technologies have made some investors hesitant to back offshore energy projects.

Current plans are for the facility to be at the Chesapeake Light Tower, a former Coast Guard lighthouse 13 miles off the coast of Virginia Beach, Va. Scientists representing industry, government and academia are likely to start research at the facility in 2015. PNNL will shape and prioritize the research conducted there, while National Renewable Energy Laboratory (NREL) will manage the facility’s remodeling and operations.

PNNL will form an interagency steering committee to determine the facility’s research priorities and procedures. Research will primarily focus on offshore wind, but will also include underwater ocean energy and environmental monitoring technologies.

Part of NREL’s renovation of the former lighthouse will include installing research equipment. Such equipment includes a meteorological tower that reaches 100 meters above sea level, which is the height of offshore wind turbine hubs.

The harsh environment and remote locale of offshore energy sites makes new technologies necessary to assess the power-producing potential of offshore sites.

Strong winds and high concentrations of salt, for example, mean data-collecting equipment needs to be heavy duty and extremely sturdy to operate offshore. And while land-based wind assessment often occurs by placing meteorological equipment on a tower, the challenges of anchoring similar towers into the ocean floor can increase costs substantially. As a result, offshore energy developers are looking at new ways to gather precise wind measurements at sites of interest.

Among the new technologies expected to undergo testing at the reference facility are devices incorporating LIDAR, also known as light detection and ranging, to measure offshore wind speeds.

With these instruments, researchers measure wind strength and direction by emitting light and then observing when and how some of that light reflects off of tiny bits of dust, sea spray or other particles blowing in the breeze. LIDAR devices for offshore wind measurement would go on buoys in the ocean. However, ocean waves move buoys up and down, which would also send the device’s light beams in multiple directions. So scientists have developed methods to account for a buoy’s frequently changing position to collect the wind data they need.

That’s where the reference facility comes in.

Mathematically corrected data from buoy-based LIDAR is a new ballgame for the wind energy industry. To prove the data they collect are reliable and accurate, wind assessment LIDAR devices would go on buoys floating near the facility and also on the facility itself. Researchers would be able to collect wind data from both sources and evaluate it to determine the buoy-based technology’s accuracy.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.