Oil refining passes peak

03/14/2010


A few weeks ago I posted a question asking if oil consumption in the U.S. hit its peak in 2007 and will not reach those levels again even after the recession ends. There is more evidence that consumption has indeed peaked because oil companies are now looking at ways to reduce refining capacity. If you can remember back as far as 2006, there was much hand wringing that no new oil refineries had been built in the U.S. since the ‘70s and gas lines were around the corner. Now there is 3 million bpd of idle capacity here and in Europe that will have to be taken offline to get oil companies’ production back into the black.

Let’s face it, most of us thought that oil consumption was on a permanent increase, or at least we were still years away from hitting the peak. Oil consumption rates were like housing prices, they never go down. We were wrong about that too. The Tribune quotes BP CEO Tony Hayward saying, “None of us will sell more gasoline than we did in 2007.”

While I feel bad for people that stand to lose their jobs, (Chevron may cut 2,000.) oil producers closing a few older and less efficient refineries would not necessarily be a bad thing. Of course hurricane-induced outages could be a problem, but in general, concentrating production in a smaller fleet of more sophisticated and cost-effective plants would help rebuild profitability. Some of those plants might also benefit from some long overdue improvements to their plant automation systems. There are plenty of ideas here at Control Engineering.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.