Patent for CNC adaptive control system

Fanuc Factory Automation America (Fanuc FA America) received a patent for developing on-demand integrated adaptive control for their CNC control system.

06/05/2012


Fanuc Factory Automation America iAdapt S adaptive controls into the CNC system for increased machine tool productivity. It improves material removal and minimizes cycle time by automatically optimizing the cutting feedrate based on the actual spindle load. Courtesy: Fanuc FA AmericaFanuc Factory Automation America ( Fanuc  FA America) and Jerry Scherer, engineer with  Fanuc  FA America, have been awarded a patent for the development of their CNC Adaptive Control System for on-demand integrated adaptive control of machining operations. This system was developed to increase machine tool productivity with  Fanuc  FA America's iAdaptS adaptive control solution.

Fanuc FA America's patented CNC Adaptive Control System measures the present value of the spindle load and then compares this value to a present value of a target spindle load. The adaptive controller is configured to control the feed rate of the machine tool relative to the workpiece to maintain the present value of the spindle load approximately equal to the present value of the target spindle load using one or more calculations of the first feed rate value, the first feed rate dither adjustment value and the second feed rate dither adjustment value.

This CNC adaptive control system is the base technology in  Fanuc  FA America's iAdaptS solution that improves material removal and minimizes cycle time by automatically optimizing the cutting feedrate based on the actual spindle load. Additionally, integration of the iAdaptS software solution within the CNC now eliminates the need for mounting hardware, simplifying installation while improving the capabilities of the original iAdapt product. The original iAdapt product introduced the concept of roughing cycle productivity to CNC customers. The "On Demand" control feature simplified the use of the adaptive control by making it easy to setup and operate. iAdaptS extends tool life by keeping roughing tools fully loaded, putting the heat into the chips rather than the part. As a result, there are fewer minor stoppages which further increases productivity and reduces labor costs.

Fanuc Factory Automation America

www.fanucfa.com 

- Edited by Chris Vavra, Control Engineering, www.controleng.com 

Also see controleng.com/machinecontrol



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.