PLC I/Os led the way in 2011, DCS I/Os lagged

The latest report on the world market for I/O modules shows the market, especially for PLC I/O modules, recovered quite strongly after the recession with double-digit growth in both 2010 and 2011.

06/18/2012


IMS Research (recently acquired by IHS Inc.) has released its latest report on the world market for I/O modules. It shows that the market, especially for programmable logic controllers (PLCs) I/O modules, recovered quite strongly after the recession with double-digit growth in both 2010 and 2011. However, recovery of the distributed control system (DCS) I/O market was somewhat slower.

I/O modules, which are mostly used with controllers, are essential components in complex industrial automation systems. By adding more I/O modules, the scope and flexibility of an entire automation system can be enhanced. PLCs, for example, can move towards their control capability to the field level by adding remote I/O modules. There are many active vendors in this market, including as suppliers of a complete range of automation products and specialists which mainly provide I/O modules.

Broadly, I/O modules can be segmented into three categories by controller type (PLCs, DCS, and industrial PCs), the most commonly used products in industrial automation. The world recession hurt the industrial automation market, with the market for each controller type falling more than 20% from 2008 to 2009. The I/O market also decreased due to the lower demand for controller products.

“The recovery since 2010 was quite exciting,” commented IMS Research market analyst Alex Hong. “As the entire I/O module market has benefited from the recovery of the controller market, especially that for PLCs.” The entire I/O module market grew more than 20% in 2010, and more than 10% further in 2011. The main contribution to growth came from PLC I/O modules because of blooming machine-builder markets.

Machine builder markets, especially in Europe and Asia, hold a strong position. Because they use PLCs widely, the demand for the I/O modules, which are attached to the PLCs, also enjoyed strong growth. On the other hand, demand for process automation has lagged somewhat. Cash flows for those projects were cut off because of the recession and this situation continued even into 2011. Thus, the market for DCS I/O modules, which is closely associated with the process industries, grew slower than that for PLC I/O modules. However, worldwide PLC I/O module revenues make up more than half of the total I/O module target, which thus had quite strong growth.

“Overall, the I/O module market will still benefit from a growing PLC market in the foreseeable future,” added Hong. "However, growth in the PLC and DCS I/O module demand will differ, mirroring the differing performance of the discrete and process automation markets.”

Additional topics covered in the 2012 edition report include:

  • Detailed revenue and unit shipment information for local and remote I/O modules.
  • The market for each product type segmented by region, control system type and functionality.
  • Further detail on the PLC I/O module market, with statistics on protection level and product types.
  • Detailed industry breakdowns for PLCs and DCS, segmented by machine builder and end-user sector.
  • Top-level data on industrial ethernet and fieldbus use with I/O modules.
  • Market share estimates for 2010 and 2011 for the leading providers of each I/O module product type.
  • Commentary and analysis discussing key market drivers.


No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.