Preparing for all types of attacks

There are intended and unintended hits, or attacks, on control systems and if you believe what one study says, 20% are intentional and 80% unintentional.

07/13/2011


ISS SourceThere are intended and unintended hits, or attacks, on control systems and if you believe what one study says, 20% are intentional and 80% unintentional.

“We always hear about the threat of attacks, but there are unintended treats can be just as bad,” said John Cusimano, director of security at exida during his Tuesday talk entitled “The seven things every automation professional should know about control system security” at the 2011 Siemens Automation Summit in Orlando, Fla. “We have to protect from both.”

One of the intended attacks was Stuxnet.

“Stuxnet was an intended attack,” Cusimano said. “There are people that think there will be more of these types of attacks in the future.”

That worm had an impact throughout the world, Cusimano said. “It provided proof of concept. We had been talking about this for decades. Until Stuxnet, however, we didn’t have anything to show. It has really raised awareness at the executive level. At the engineering level, we have known about it. We are starting to see this level of interest at the board level.”

While Stuxnet did raise awareness, Cusimano stayed true to his talk and talked about the seven things end users should be aware of to secure themselves:

  1. Assess existing systems. “You need an understanding of where you are and where you need to be,” he said.
  2. Document Policies and Procedures. “IT and engineering are different, but they have overlap,” he said. “You need to have a set of procedures, but there may need to have an appendix for automation.”
  3. Train Personnel and Contractors. “Make personnel are aware and trained. You need to provide role-based training,” Cusimano said.
  4. Segment the Network. “You need layers of protection or defense in depth,” he said. “We need to have just one layer of protection, but multiple layers of protection. If something gets by one layer then another can pick it up.”
  5. Control Access to the System. “You really need to control who or what has access to the system,” Cusimano said.
  6. Harden the System. You can remove or disable unused communication ports or remove unnecessary applications and services. In addition, Cusimano said, the user should apply patches when and where applicable and consider whitelisting.
  7. Monitor and Maintain. “Once we have a system in place, we can’t rest on our laurels,” he said. “Things change on a daily basis.”

- Edited by Amanda McLeman, Plant Engineering, www.plantengineering.com



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Big plans for small nuclear reactors: Simpler, safer control designs; Smarter manufacturing; Industrial cloud; Mobile HMI; Controls convergence
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.