Products use mechatronic design for manufacturing systems

Beckhoff Automation XTS modular linear motion control system integrates with industrial PC, TwinCAT 3, and delta-robot doing pick and place.

05/13/2013


Beckhoff's XTS drive system combines rotary and linear systems for mechanical engineers. Courtesy: BeckhoffTo condense the Beckhoff Automation architecture to its simplest form, we promote one controller, one network, and one software platform across one system architecture. We call this “The Power of One,” where Beckhoff can integrate high-performance PLC, motion control, safety, communications, and robotics on an IPC (industrial PC) or embedded PC. The XTS (eXtended Transport System) from Beckhoff Automation is the kind of mechatronic advancement that takes full advantage of more powerful PC-based controllers and one architecture. A machine equipped with XTS would leverage one standard controls architecture (PC-based control), one software platform (TwinCAT 3), and one network (EtherCAT).

XTS combines linear motor technology on a continuous motion track that consists of straight and curved track segments allowing the machine designer to configure topologies that suit numerous applications. The XTS track is like an inverse linear motor and is specially engineered for multiple carriers; each mover’s position is controlled individually and can be adjusted with great precision on the fly.

XTS is supplied by either a 24 V dc or 48 V dc bus. Forces of 30 N continuous and 100 N peak per mover are possible. The movers have positioning accuracies of +/-25 µm at 1.5 m/s and a positioning repeatability of less than 10 µm at mover standstill. Movers have a maximum speed of 4 m/s at 48 V dc supply voltage.

TwinCAT 3 from Beckhoff abstracts the complex underlying control principles in XTS, which enables the controls engineer to program against the movers’ absolute position. At Hannover Fair 2013, Beckhoff paired a delta-style pick-and-place robot system with the high-speed mechatronic XTS solution, running the automation software on one industrial PC.

- Matt Lecheler is motion specialist at Beckhoff Automation. Edited by Mark T. Hoske, content manager, CFE Media, Control Engineering, mhoske(at)cfemedia.com.

ONLINE

Read "Mechatronics: Electromechanical manufacturing systems" to learn more application details below

www.beckhoffautomation.com/xts 

Beckhoff Automation YouTube video of the XTS at 2013 Hannover Fair (about 30 sec into the video)



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.