Project details: Textile automation at Inman Mills

Inman Mills is the sixth of seven textile manufacturing facilities Patti Engineering Inc. has modernized with custom designed automation technology. Technologies used include...

06/08/2012


Inman Mills is the sixth of seven textile manufacturing facilities Patti Engineering Inc. has modernized with custom designed automation technology. Patti Engineering is a control systems integration company based in Auburn Hills, Mich., with offices in Massachusetts and Texas, with expertise in the textile industry.

Inman contacted its supplier, and the supplier recommended Patti Engineering, which used the latest PC hardware, Phoenix Contact’s Steeplechase Visual Logic Controller (VLC), and Iconics Graphical User Interface (GUI) software to build a fully integrated electrical control system.

Ring spinning frame shows roving bobbins in the creel. Courtesy: Patti Engineering

Patti Engineering is a certified Siemens Solution Partner with extensive Siemens expertise, and it restored the Siemens S5 PLC to full functionality for the the bobbin stripper.

Inman Mills plant manager Bill Hightower said, “Patti Engineers were very professional and knowledgeable about the complete automation system where the software was installed. They provided exceptional communication at all times during the installation, training, and implementation of the system. We are pleased as this installation by Patti Engineering has performed exceptionally since implementation. As we continue in our learning mode, if we have any questions about the system, Patti Engineering has been very quick to respond. I would not hesitate to recommend Patti Engineering based on the excellent results we experienced on this project.”

Patti Engineering’s first experience with this type of equipment laid the foundation for expertise in this market segment. On the original textile plant retrofit, the ring spinning system with a PC-based control systems and hardware and software was no longer supported. With complicated code written in German, Patti Engineering had to build the new software program from the ground up.

According to Steve Palmgren, senior electrical controls engineer and Patti Engineering’s Texas branch manager, “upgrading the controls on ring spinning equipment in textile mills is a real sweet spot for us now; our engineers understand the systems and we are well versed on designing the best controls software solutions to have the equipment operate at peak efficiency.”

Also read: Textile automation adds to thread-thin profits for more project details and six more photos.

- Georgia H. Whalen is director of marketing for Patti Engineering Inc. Edited by Mark T. Hoske, content manager CFE Media, Control Engineering and Plant Engineering.

www.PattiEng.com



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.