Quality control measurements for smooth surfaces

Laser camera combination technology is ideal for surface measurement in many industries. The camera detects a laser line projected onto an object at a specific angle. Height and width information is determined by triangulation.

04/10/2013


A laser camera system can measure along an edge for robot guidance. Courtesy: Pepperl+Fuchs

Many industries require surface measurements, and laser camera combination technology can help. A camera detects a laser line projected onto an object, and then a triangulation calculation determines height and width. Many industries have applications that require smooth, sealed surfaces without gaps, ruts, or protrusions. These industries include glass, metal processing, plastics, tire, automotive, aerospace, and even highway road construction. When it comes to meeting the needs of these different industries, quality checks and process control based on measurement play a vital role.  

In the past, lasers, mechanical measuring devices, and even wedges were used to check quality, but usually just as a spot check. Depending on the application, 100% inspection was too slow and required a large capital investment. A profile scanner, for example, has historically been very expensive and the units being scanned generally didn’t have an interface to decipher all the analog data produced by the scanner. Generally, a self-developed interface and HMI were required and the cost went up. If a company then wanted to capture the data and chart it for process control purposes, database development became necessary. 

Surface quality control

Many companies are being asked to invest in ensuring the quality of the products they are producing. For example, the automotive industry is under the watchful eye of the consumer. Consumers expect each body panel on a vehicle to line up flush with the body panel next to it. Gap and flush measurement for quality control can take place while the body panels are placed onto the vehicle, or as a spot check on each vehicle. Consumers don’t want leaking sun roofs, glass panoramic roofs, or windshields. Leak protection depends on measuring the glue bead being applied for thickness.

Automobile panels can be positioned using a laser camera system to accomplish best-fit placement. Courtesy: Pepperl+Fuchs

The good news is that the demand for quality control measurement has sparked a whole new set of technologies entering the market at reasonable prices. Some laser systems now use a camera in combination with a laser for on-the-fly measurement at .01 mm. Some offerings use a simple browser for system setup; others have computer software that sets up a server or PC with a human-machine interface (HMI) and databases ready to go.

Laser camera combination technology is ideal for many industries, including the ones mentioned earlier. The camera detects a laser line projected onto an object at a specific angle. Height and width information is then determined by the triangulation method. Depending on the manufacturer and application, various distances are available. One company uses this technology to measure the depth of ruts in roads, measuring 4.2 meters wide at highway speeds day or night.

Put quality control measuring to work using many available options.

- Todd Belt is systems sales manager – VMT, Pepperl+Fuchs. Edited by Mark T. Hoske, content manager, CFE Media, Control Engineering and Plant Engineering, mhoske(at)cfemedia.com.

Online

See article "Laser light sensor helps quality control" below

www.pepperl-fuchs.us 

See other machine vision coverage at www.controleng.com/machinevision.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.