Radar level transmitter for solids

Siemens introduces its Sitrans LR560 using 78 GHz (W band) for high accuracy with dusty solids.

03/07/2011


Siemens introduces its Sitrans LR560 using 78 GHz (W band) for high accuracy with dusty solids.Siemens Industry Automation Division has announced its launch of the Sitrans LR560, which it characterizes as the first 78 GHz (W Band) microwave radar level transmitter for solids level measurement. Siemens says the new unit combines level measuring with superior accuracy in tough environments, with intelligent signal processing for optimum performance at all operating stages.

The Sitrans LR560 transmitter is equipped with a newly developed lens-style antenna and uses non-contacting two-wire FMCW (frequency modulated continuous wave) radar technology. This new design is particularly suited for hot (up to 392 °F / 200 °C), dusty applications such as cement powder, plastic powder or pellets, grain, coal, wood powder, and fly ash. The vessel can be pressurized up to 44 psi (3 bar). Instrumentation technicians can change programming even in a hazardous environment using an intrinsically safe handheld programmer without having to open the instrument’s lid.

The transmitter has a measurement range of 100 m (328 ft.), using a narrow four-degree beam. This helps it avoid silo wall obstructions and other installation interferences, allowing it to be installed virtually anywhere on the top of the silo. Its high frequency also enables the unit to emit a very short wavelength to provide exceptional signal reflection, even from solids with a steep angle of repose. The high resolution graphical interface with its Quick Start Wizard menu guides the user and expedites start-time to less than one minute for accurate and reliable level measurement readings without any fine-tuning.

Connectivity options include HART, Profibus PA, or Foundation fieldbus protocols. Programming is supported locally with pushbuttons or an infrared handheld programmer. The transmitter also supports remote configuration and diagnostics with Siemens’ Simatic PDM (process device manager), Emerson AMS, or Pactware using Siemens DTM. The local display interface features a backlit display and can be rotated to four positions for easier viewing.

The antenna is resistant to material build-up, but also has a built-in purge system for cleaning exceptionally sticky solids material. While its high-frequency operation normally makes aiming unnecessary, an optional aiming flange helps direct the beam to an area of specific interest, such as the discharge area of a silo cone. Sitrans LR560 includes an optional graphical local display interface that improves setup and operation using an intuitive Quick Start Wizard, and echo profile display for diagnostic support.

www.usa.siemens.com/automation

Visit the Control Engineering Process Control Channel

Edited by Peter Welander, pwelander(at)cfemedia.com



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.