RF vector signal analyzer for demanding automated test applications

National Instruments' NI PXIe-5665 is a 3.6 GHz RF vector signal analyzer features phase noise, average noise level, amplitude accuracy and dynamic range.

05/06/2011


National Instruments has introduced the NI PXIe-5665, a 3.6 GHz RF vector signal analyzer (VSA) that delivers high RF performance in a cost-effective PXI form factor. The new VSA features phase noise, average noise level, amplitude accuracy and dynamic range. The VSA’s PXI platform also facilitates peer-to-peer streaming; includes a flexible multiple input, multiple output (MIMO) architecture for phase-coherent measurements; and offers measurement speeds that are at least five times faster than traditional rack-and-stack instruments – all of which make it ideal for demanding automated RF test applications.

The VSA combines the new NI PXIe-5603 downconverter with the new NI PXIe-5653 local oscillator synthesizer and the NI PXIe-5622, a 150 MS/s intermediate frequency (IF) digitizer. This combination creates an ideal solution for spectrum and wideband vector signal measurements over a frequency range from 20 Hz to 3.6 GHz with analysis bandwidths up to 50 MHz. The new VSA features an exceptionally low phase noise of -129 dBc/Hz at a 10 kHz offset at 800 MHz, an average noise level of -165 dBm/Hz, a third-order intercept point of +24 dBm and absolute amplitude accuracy of ±0.10 dB. These specifications make the NI PXIe-5665 the highest performing instrument in its class.

For modulated signal analysis, the VSA’s unique onboard self-calibration tool makes it possible to achieve an IF amplitude response of ±0.15 dB and IF phase linearity of ±0.1 degree. This accuracy facilitates exceptional error vector magnitude performance of less than 0.21% for a 256-QAM signal. The VSA’s flexible, modular architecture expands to provide phase-coherent acquisition for MIMO test, as well as a 20 GHz/s scan rate and peer-to-peer streaming for efficient spectrum monitoring. Additionally, engineers can operate the NI PXIe-5665 using its RF list mode function to deterministically step through a user-defined set of RF configurations using internal timing or an external trigger to significantly reduce test time.

Because the NI PXIe-5665 joins a product line of more than 1,500 software-defined PXI modular instruments, engineers can mix and match the VSA with a variety of modules and control an entire automated test system with NI LabVIEW graphical system design software. This makes PXI systems ideal for a multitude of automated test applications. Engineers also can fully take advantage of the VSA’s software-defined performance with RF software toolkits for LabVIEW, NI LabWindows/CVI and .NET to test the latest RF and wireless communication standards including GSM/EDGE, WCDMA, LTE, WLAN and WiMAX.

www.ni.com

National Instruments

- Edited by Amanda McLeman, Control Engineering, www.controleng.com



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.