Robot safety standard approved: robots, humans can collaborate safely

The American National Standards Institute has approved ANSI/RIA R15.06-2012, which addresses collaborative operation between workers and robots and soft axis and space limiting technology.

05/22/2013


A new American national robot safety standard has been approved by the American National Standards Institute (ANSI). Developed by Robotic Industries Association (RIA), the ANSI/RIA R15.06-2012 standard has been updated for the first time since 1999 and is now harmonized with the International ISO 10218:2011 standard for robot manufacturers and integrators.

RIA robotic safety standard was discussed at Pack Expo 2012. Courtesy CFE MediaA key feature in the standard is “collaborative operation,” which is the introduction of a worker to the loop of active interaction during automatic robot operation. Systems can now be designed for the operator to directly load/unload the robot or manually drive the robot to a selected location thus eliminating costly fixtures.

Another key feature is that the standard addresses “safety-rated soft axis and space limiting” technology. This optional feature available on new robots may have different names depending on the robot manufacturer, but the functionality remains the same. Safety-rated software is used to control the robot motion so that restricted space can be more flexibly designed. Case studies have shown that that this saves both floor space and cost in the system design.

Standards development efforts will now shift to issuing new documents which will provide guidance to the user on using the new ANSI/RIA R15.06, including technical reports on risk assessment and proper implementation of safeguarding robot systems.

American National Standards Institute (ANSI)

www.ansi.org 

Robotic Industries Association (RIA)

www.robotics.org 

See related articles below for more, related robotic safety information, videos, and photos. Also see the Machine Safety Blog.

- Edited by Control Engineering, Plant Engineering, CFE Media.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.