Rotary position sensors

The RTY Series Hall-Effect Rotary Position Series by Honeywell have flexible options for specific application needs, particularly in harsh environments.

02/24/2012


The RTY Series Hall-Effect Rotary Position Series by Honeywell have flexible options for specific application needs, particularly in harsh environments. Courtesy: HoneywellHoneywell's (NYSE: HON) RTY Series Hall-Effect Rotary Position Sensors have several options that allow customers to customize the sensor configuration to meet their specific application needs, especially those in harsh environments.

The RTY Series’ solid-state Hall-effect technology provides non-contact operation and low torque actuation which reduces worn-out mechanisms and provides a minimum 12M cycle product life. The sensor’s IP67-sealed package has an integral connector. The integrated reverse polarity protection provides protection against installation errors. Robustness against electromagnetic interference is proven out by automotive-grade EMI/EMC testing. Industry-standard AMP termination, 32 mm mounting pitch, North American and European pinout styles, and the compact package provide easier drop-in replacement in existing applications.

The RTY Series uses a magnetically biased, Hall-effect integrated circuit (IC) to sense rotary movement of the actuator shaft over a set operating range. Rotation of the actuator shaft changes a magnet’s position relative to the IC. The resulting flux density change is converted to a linear output. The IC, together with conditioning and protection circuitry, and the permanent magnet, is sealed in an IP67-qualified package for durability in most harsh environments.

Eight operating ranges (50°, 60°, 70°, 90°, 120°, 180°, 270°, and 360°) are tolerant to over-travel and allow OEMs to choose the range of travel needed for their specific application. Low voltage and high voltage versions cover an input voltage range of 4.5 Vdc to 30 Vdc. Most applications require no lever, and no brackets are necessary.

Potential transportation applications for the RTY Series sensor include position and movement detection of pedals, throttles, gear shift, levers, steering, linkages, and hitches (trucks, buses, off-road vehicles, industrial/construction/agricultural vehicles and equipment, cranes), suspension displacement/kneeling (buses, trucks), and tilt/trim position (boat engines, tilling equipment). Potential industrial applications for the RTY Series sensor include valve and HVAC damper control, and irrigation pivot control.

Honeywell

www.honeywell.com 

- Edited by Chris Vavra, Control Engineering, www.controleng.com 

controleng.com/sensors has more information about industrial sensors.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.