Sanitation standard operating procedure in the meat and poultry food manufacturing plant

Maintaining a high level of cleanliness and controlling pathogenic bacteria growth are frequent challenges within the meat and poultry industry.

07/25/2013


Courtesy: Spirax SarcoProper sanitation and cleanliness within meat and poultry processing plants is of high importance for the food industry. Illnesses resulting from the consumption of contaminated food are a significant public health issue in the United States. Maintaining a high level of cleanliness and controlling pathogenic bacteria growth are frequent challenges within the meat and poultry industry. Establishing and performing basic and effective ground rules for sanitation and cleaning practices in the food manufacturing environment enhances the food processing plant’s cleanliness and sanitation.

On Jan. 27, 1997, the U.S. Dept. of Agriculture (USDA) mandated sanitation standard operating procedures (SSOPs) to be developed by processing plants for meat and poultry operations.

Code of Federal Regulations, Title 9, Animal and Animal Products, Part 416.12(a), Development of Sanitation SOP’s:

    The Sanitation SOP’s shall describe all procedures an official establishment will conduct daily, before and during operations, sufficient to prevent direct contamination or adulteration of product(s).

The Food Safety and Inspection Service (FSIS), an agency of the USDA, is a public health regulatory agency obligated with ensuring that the United States supply of meat, poultry, and egg products are safe for consumers. The FSIS strategy builds the foundation for sanitation and cleaning practices in the food processing production. The FSIS improves the safety of meat and poultry products from the beginning to the end of the production process; from slaughter to labeling for the market.

When plant managers develop SSOPs, the plant’s good manufacturing practices (GMPs) should be taken into account. The written SSOP should demonstrate knowledge and commitment to sanitation, production of safe meat and poultry products, and detail pre-operational and during operational daily sanitation procedures. An appointed plant employee(s) will monitor and document adherence to the SSOP along with corrective actions taken to prevent direct product contamination or pathogenic bacteria growth. Pre-operational sanitation monitoring evaluates and documents effective cleaning of all direct product contact used at the start of production. Operational sanitation monitoring evaluates and documents would include actions identifying and correcting any occurrence of direct product contamination from environmental sources (facilities, equipment, pests, etc.) or plant employee practices.

Courtesy: Spirax Sarco

Code of Federal Regulations, Title 9, Animal and Animal Products, Part 416.14, Maintenance of Sanitation SOP’s:

    Each official establishment shall routinely evaluate the effectiveness of the Sanitation SOP’s and the procedures therein in preventing direct contamination or adulteration of product(s) and shall revise both as necessary to keep them effective and current with respect to changes in facilities, equipment, utensils, operations, or personnel.

The outcome is a sanitary environment for processing, storing or handling any meat or poultry food. All facility records of pre-operational and operational sanitation monitoring, including corrective actions to noncompliance, are to be maintained (on-site after completion for forty-eight hours and records be made available to FSIS employees within 24 hours of request if maintained off-site)by the processing plant for at least six months.

    Employee training is equally important as the food manufacturing plant SSOP documents. Food manufacturing plant sanitation policies become a routine when all employees are educated and trained on the sanitation policies within the company. Employees begin to have ownership of their work station and continue to make improvements to the SSOP and to the food processing plant overall.

Jahaira Lebron is the product market manager at Spirax Sarco. Content provided by Spirax Sarco, originally published in Steam News MagazineSource: United States Government Printing Office. Web. 9 CFR Ch.III (1-1-12 Edition). Web. 30 Nov. 2012.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.