Selecting device-level communication protocols

How do instrumentation manufacturers decide which communication options to offer with each type of device?

11/18/2011


Dear Control Engineering: After looking at some recent articles about wireless field instrument deployments and new flowmeters with Ethernet connections, I wonder how device manufacturers decide which options they will offer with specific types of instrument and transmitters.

Companies that make process instrumentation are driven first and foremost by what they believe will sell, so they pay very close attention to customer demand (or at least they should). There are also logistical issues that enter in as well.

Considering the Ethernet connectivity question, that is something that we have been watching for some years. Ethernet networks continue to move closer to the manufacturing floor, but they rarely punch through the PLC barrier. In other words, networks where PLCs are communicating with field devices rarely use Ethernet. They use cheaper analog (4-20 mA) or simpler digital (fieldbus, Modbus) communication more suited to the limited amounts of data the devices produce. The new flowmeters with Ethernet connections are Coriolis and magnetic designs that generate multiple process variables and diagnostic information, so they fall in the complex end of the instrumentation spectrum. I suspect many companies will be interested to see how these fare in the marketplace.

The types of devices that are available with integrated wireless transmitters seem to be following two approaches. First, devices that are relatively simple and suited to battery power. If you think back a few years, some of the early wireless devices tended to be things like temperature or pressure sensors. A thermocouple is ideal for running on a battery because it has minimal outside power requirements. The second approach concentrates on devices that are needed in geographically spread out applications. That’s one reason why wireless radar level gages are emerging. These are needed in tank farm applications where it is costly to run long distance cables.

Furthermore, if you start analyzing various offerings, you’ll find a high correlation between devices needed in oil refineries and those that communicate using Foundation fieldbus.

New technologies are helping reduce the necessity of being concerned about such things. Devices are emerging that can be reconfigured for different communication methods (e.g., FCI gas flowmeter). Companies like Emerson and Invensys have introduced field wiring and marshalling systems that allow users to mix-and-match devices using modular and software configurable connectivity. This evolution will likely continue and offer many new options as companies consider approaches for new projects.

Peter Welander, pwelander(at)cfemedia.com



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.