Separating process conditions from product attributes

What is your instrumentation telling you? Can the information help you learn about the product?

06/24/2011


Dear Control Engineering: The article Beyond the PV discusses the differences of measuring process conditions versus measuring the product directly. How do we separate those two?

In a given process there will be instruments designed to measure all sorts of things. We have what we call the “big four process variables,” which are pressure, temperature, flow, and level. These are all process conditions, in that they tell you, for the most part, about what’s happening with the process, but no specific attributes of the product.

Let’s say you have a tank holding a given amount of liquid. Measuring the level, pressure, or temperature of the liquid will tell you what the conditions are in the tank, but they will not help you determine if it is water, ethanol, or gasoline. If you’re clever, you can determine the weight of the liquid using a pressure sensor which will help you determine its density. That is a specific attribute of the product.

In a given manufacturing process, you will normally need both kinds of measurements at appropriate stages. As the article points out, the number of options available is huge, but often there are gaps. There are relatively few process conditions that can’t be measured one way or another. (Another article in the June issue describes using infrared to measure difficult temperature applications.) However if you want to find out product attributes, things get much more complicated. The more specific the attribute, the fewer choices you have in most cases.

In his article, Scheele points out that the sophisticated signal processing capabilities available now allow users to combine readings from a group of instruments to determine characteristics that cannot be measured directly. Back to the tank example, if you measure the physical level (volume) of liquid in the tank with a radar sensor, the temperature of the liquid with an RTD, and the weight of the liquid with a pressure sensor, you can get a very accurate picture of its density by performing the appropriate calculations. From process conditions, you can learn about specific product characteristics. Admittedly, that’s a pretty basic example, but the same concept applies in far more sophisticated applications. A Coroiolis flowmeter can tell you the density of what is flowing through it, but it does that function by calculating the value from other attributes, just like the tank example. It is not some type of native densitometer.

Ultimately the key is figuring out how to select and place instrumentation in a process to get the information you really need. As Scheele says, there are possibilities of “building a new knowledge base in which data from conventional field devices is combined with applications expertise, modeling, and advanced process control software to enable measurements that could not have even been imagined as little as 20 years ago.”

Peter Welander, pwelander(at)cfemedia.com



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.