Servo motor communication via CAN serial port

Animatic offers Combitronic communication which uses a CAN serial port to join up to 120 SmartMotor servos.

02/16/2011


Optional to any SmartMotor, Animatic’s patent-pending Combitronic communication uses a CAN serial port to join up to 120 SmartMotor servos so that any SmartMotor may read, write, or control any other SmartMotor. The code to accomplish this task is to tag a local variable or command with a colon and the SmartMotor’s CAN address.

All machine designs start with the decision between centralized control and distributed control. Having one centralized master in the entire machine’s communication usually leaves the designer with an often overwhelmingly complex cabinet of controls, rails, mounts, cabling and wires looking similar to a science fiction nightmare, as well as an overworked master. As more engineers move towards distributed control with multiple machine parts controlling separate aspects of the whole machine, issues arise here as well. The problem now becomes communication, where the interaction and coordination needed from each node to achieve tasks by the machine as a whole fall by the wayside. It’s between the headaches of centralized and distributed control that Combitronic communication provides the solution: an invisible communication protocol that works between SmartMotor servos for data-sharing and coordination while not interfering with DeviceNet or CANopen communication coming from the PLC/HMI/master. With Combitronic and SmartMotor, there is no need for a PLC, Animatics noted.

With Combitronic, no new fieldbus network has to be learned, so the user doesn’t have to write a stitch of code for motor to motor specific communication. Simply by addressing the SmartMotor servos in the program, a group of SmartMotor products becomes one multi-tasking, data-sharing, multi-axes machine with access to all motion, program, I/O and data functions of every other SmartMotor. A group of only 10 SmartMotor integrated servos on a Combitronic network would have 20 communication ports and between 70 and 170 points of I/O communications.

Feedback: At the Animatics Institute in October 2010, programmers reportedly appreciate that each of their SmartMotor demos had already been addressed over CAN and with the proper code could control any other engineer’s SmartMotor movement with a few swipes at the keyboard.

Application video of Combitronic

www.animatics.com

Animatics

- Edited by Gust Gianos, CFE Media, Control Engineering, www.controleng.com



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Big plans for small nuclear reactors: Simpler, safer control designs; Smarter manufacturing; Industrial cloud; Mobile HMI; Controls convergence
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.