Servodrive control improvements augment machine tool performance

Applied automation: Upgraded vertical honing machines introduce new capabilities, higher accuracy/safety, and new model designations. New servo technology for spindle, stroker, and tool-feed add new capabilities to reduce cycle time and expand processing options.

01/22/2013


Sunnen Products has new servomotor and drive technology under the hood of its three primary vertical honing platforms, bringing additional capabilities, speed, accuracy, and safety to the machines. Courtesy: Sunnen ProductsSunnen Products introduces new servomotor and drive technology under the hood of its three primary vertical honing platforms, bringing additional capabilities, speed, accuracy, and safety to the machines. As a result, the company’s existing SV-1000, SV-400, and SV-500 models are being replaced with the SV-2000, SV-2400, and SV-2500 series of machines that feature the same outward appearance as the predecessor models. Upgraded capabilities in the new models include selectable tool-feed, constant crosshatch, and faster automatic bore detection for reduced cycle times. The range of machines can process bore IDs from 3 mm to 300 mm, typically found in parts, such as fuel injectors, piston pumps, gun barrels, hydraulic components, engine/compressor cylinders, diesel cylinder liners, landing gear, and similar components.

All of the new models now include a 7.5 kW (10 hp) servo spindle. The new SV-2000 platform offers a new choice of controlled-force or controlled-rate tool feed. Controlled-rate allows automatic tool feed in increments as fine as 0.1 µm (0.000010-in.). Controlled-force tool feed monitors force in the tool feed system. It feeds the abrasive at the highest rate possible for part conditions, ensuring the shortest cycle times and longer abrasive life. All the new platforms include safe-drive technology that monitors all safety devices on the machine with a separate PLC, which stops or limits the speed of the drives if triggered.

The new SV-2400 platform now includes selectable “constant spindle load” and controlled-rate tool feed as standard. Other new capabilities on the upgraded models include whole-bore, constant crosshatch angle. Constant crosshatch eliminates the "flattening" of the crosshatch angle at stroke-reversal points, a feature required by some engine manufacturers and MilSpec parts. The new drive technology also enables the machines to be set up to hone only on the pull stroke, or easily produce custom profiled and tapered bores.

SV-2000 and SV-2400 machines are already in production, while remaining SV-400 and 500 models will be replaced later this year, the company said.

- Edited by Mark T. Hoske, content manager, CFE Media, Control Engineering and Plant Engineering, mhoske(at)cfemedia.com.

ONLINE

www.sunnen.com 



Thet Aung , JAPAN, 01/27/13 03:35 AM:

Your website updates my knowledge. Thank you very much.
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.