Shaft angle rotary sensor gives 360 degree absolute position feedback

Piher International PST-360 is a rotary sensor designed to be more smaller and compact in a through-hole design.

08/02/2011


Piher announced the availability of a new shaft angle rotary sensor - the PST-360 Through-Hole Position Sensor. The PST-360 combines a through-shaft design with 360º absolute position feedback in an extremely thin package.

Key features include a through-hole design where the sensor fits over existing shaft and bearing assemblies. The new sensor reportedly incorporates a proprietary ring magnet with a fully sealed Hall ASIC as the sensor element. This combination is truly non-contacting and does not rely on gears or other interfacing parts and therefore matches the durability specifications of the final application. The proprietary design provides a streamlined sensor with only one moving part along with programmable electronics designed for harsh environments. The result is an exceptionally small form factor, cost-effective product.

Measuring just 9.8 mm thick with a body diameter of 37 mm and 50.0 mm mounting hole spacing, engineers can now integrate a fully featured rotary sensor directly on their existing shafts without the packaging issues that typically accompany encoders or other through shaft sensing devices. The standard model features a rotor with a 14.05 mm inside diameter (double flatted) shaft design. Other custom rotor configurations are available from Piher to adapt existing OEM shafts to the standard PST-360 Sensor.

The PST-360 is a reportedly robust design with fully encapsulated electronics surrounding the durable ring magnet, allowing for use in high humidity environments. Unlike optical encoders, it has no sensitivity to dust or dirt and can tolerant high vibration cycles as the ring magnet never comes into contact with the sensing electronics.

The new device offers electrical angles up to 360° with no dead band and linearity error as low as ±0.5%. Rated for use at -40 C to +85 C, optional models are rated up to 150 C. The sensor can be programmed with full scale output with angles as narrow as 20 degrees. The device supports most common electrical signal outputs with minimal investment. Optional outputs include: Analog, PWM (12 bit) or Serial Protocol (SPI) at 14 bits and includes a second output channel to provide a programmable switch signal. Redundant versions are available with duplex, triplex and quad redundant versions all within the same package size.

With its integrated redundancy, the new sensor is ideally suited for use in a wide range of off-highway, construction and agriculture equipment drive-by-wire applications. It can be easily adapted to fit marine outboard steering and throttle control, robotic controls, material handling, electronic braking systems, automation equipment and medical devices.

"The PST-360 provides a breakthrough in terms of simplicity, size, cost and robustness, especially when compared to existing absolute angle sensors and encoders," explained Paul Cain, Piher International's General Manager for North America. "The propriety Hall design incorporates a rotating ring magnet as the sensing source, allowing for the smaller package and simplified electronics that are easily integrated into the final customer's product"

www.piher.net

Piher International Corporation

www.meggitt.com

Meggitt PLC

- Edited by Chris Vavra, Control Engineering, www.controleng.com



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Big plans for small nuclear reactors: Simpler, safer control designs; Smarter manufacturing; Industrial cloud; Mobile HMI; Controls convergence
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.