Siemens: Update on Stuxnet virus, Simatic WinCC SCADA systems

It has been more than two weeks since Siemens last received a report of an attack on customer systems by Stuxnet. From mid-July to late August, a total of 15 cases were reported to Siemens where the Stuxnet virus was detected in various plants, roughly one third of which were in Germany. Siemens is not aware of any instances where production operations have been influenced or where a plant has failed; the virus has been removed in all cases known to Siemens.

09/22/2010


Siemens Industry Inc. provided this Sept. 22, 2010, update on Stuxnet:

Siemens was notified about the malware program (Trojan) that is targeting the Siemens Simatic WinCC and PCS 7 software on July 14, 2010. On July 22 Siemens provided its customers with a tool for download, which detects and removes the virus without influencing plant operations. All of the main virus scanners are now able to detect the Trojan. On Aug. 8, Microsoft closed the security breach in the operating system, and the threat of the Trojan spreading uncontrolled through industrial environments has consequently been averted.

It has been more than two weeks since Siemens last received a report of an attack on customer systems by Stuxnet. From mid-July to late August, a total of 15 cases were reported to Siemens where the Stuxnet virus was detected in various plants, roughly one third of which were in Germany. Siemens is not aware of any instances where production operations have been influenced or where a plant has failed; the virus has been removed in all cases known to Siemens.

Siemens has isolated the virus on a test system to carry out more extensive investigations. Based on previously analyzed properties and the behavior of the virus in the software environment of a test system, this does not appear to be the random development of one hacker, but the product of a team of experts. The company suspects that this team is comprised of IT experts with corresponding engineering knowledge of industrial controls based on the virus deployment in industrial production processes.

The extent of the threat to industrial systems still posed by Stuxnet following the implementation of the security updates will, however, remain uncertain until further investigations into the Trojan and its mode of operation are complete. Siemens does not yet have any leads as to the source and origin of this malicious software, but analyses are ongoing.

Additional Information:

• Investigations in July showed that Stuxnet can recognize WinCC and Step 7 programs from Siemens and communicate with certain websites/servers. Stuxnet exploits a security gap in the Microsoft Windows operating system and infects computers via USB sticks and networks. It then specifically seeks out Siemens WinCC and PCS 7 installations. 

• The malware carries its own blocks (for example, DB890, FC1865, 1874) and tries to load them into the CPU and integrate them into the program sequence. If the above-mentioned blocks are already present, the malware does not infiltrate the user program. If the above-mentioned blocks were not present in the system and are now detected, the virus has infected the system. In this case, Siemens urgently recommends restoring the plant control system to its original state.

• Further investigations have shown that the virus can theoretically influence specific processes and operations in a very specific automation or plant configuration in addition to passing on data. This means that the malware is able, under certain boundary conditions, to influence the processing of operations in the control system. However, this has not yet been verified in tests or in practice.

•Siemens experts are working with Microsoft and the distributors of virus scan programs to analyze the likely consequences and the exact mode of operation of the virus.

•Siemens continues to remind customers of the importance of securing their IT systems and computers against virus attacks, using the latest virus scanners, such as Trend Micro, McAfee and Symantec, and installing the most recent patches from software vendors like Microsoft.

Also read from Control Engineering:

Stuxnet is a ‘Weapon’

Cyber security forensics tool for industrial control systems

Cyber security for control systems: More tips, warnings from INL

 



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.