Simulating analog

Is it possible to use digital tools to simulate an analog environment?

12/10/2010


Dear Control Engineering: I was reading a story about a new simulator at a nuclear power plant. The photo included with the article shows an old-style analog control room. Is that still operating? How do you build a simulator for that?

The article you mention from November 16, discusses how Omaha Public Power District is updating the simulator at its Fort Calhoun nuclear plant. The photo with the story is not dated, but looks like it could go back to 1970. According to the folks at L-3 Mapps, who will be providing the simulator, that photo is about two years old, and is not an actual control room, but the simulator. Nuclear power plants typically built a duplicate control room to use for training. The photo is included here again, cropped a little tighter and larger so you can see more detail.

An analog power plant simulator.The control room of the plant reportedly does still look like that, so the simulator retains its accuracy. This brings up some interesting thoughts on implementing such a project. If you’re dealing with more modern digital control architecture with computer driven HMIs, it isn’t all that difficult to create a platform that looks just like the real thing. You can use all the same graphics to retain the look and feel. However, if you’re creating a simulator that has to drive analog meters, chart recorders, and panel annunciators as output devices, it’s a bit more complicated. Your system has to generate whatever kind of signal is required to get that device to display the correct values. That requires some interesting I/O capabilities. It’s sort of like having to build a robotic horse to pull an old wagon rather than simply replacing it with a truck.

Many of the devices that were common 30 or 40 years ago when these plants were being designed and built aren’t so easy to get any more. However, some companies continue to build specialty items that these legacy nuke plants depend on. For example, Invensys Operations Management recently announced a partnership with Curtiss-Wright Flow Controls to continue manufacturing the old Foxboro SPEC200N line of analog control system equipment. These products date back to 1976 but are still working in many power plants.

That’s not to say that all nuke plants are museum pieces. Many have updated their automation and control infrastructure, however there are many differences from location to location. Analog is still alive and well in many.

--Peter Welander, pwelander(at)cfemedia.com



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.