Simulation and modeling software

MSC Software’s Adams and Easy5 Simulation software models and simulates motion control systems to improve machine performance.

04/11/2013


MSC Software’s Adams multibody dynamics software and Easy5 multi-domain modeling and simulation software has been used by Gildas Hubert, project manager for Armor, a manufacturer of inked ribbon used in thermal transfer printing, to simulate many coating machines and control systems. (See linked application story.)

This control system was designed using MSC Easy5 multi-domain modeling and simulation software. Courtesy: MSC Software Corp.

In the past, Armor found it difficult to model the complicated mechanisms and motion control systems involved in roll coating. This challenge was overcome with the use of Adams and Easy5, which enable control systems to be integrated into mechanical system simulations to optimize system performance. Adams, the world’s most widely used multibody dynamics simulation software, automatically formulates and solves the equations of motion for kinematic, static, quasi-static, and dynamic simulations. Easy5 is a graphics-based software tool used to model multi-domain dynamics systems characterized by differential, difference, and algebraic equations such as digital and analog control systems. Integration is accomplished with the Adams interface block in an Easy5 model that provides inputs from Easy5 into Adams and vice versa.

An Adams model of a machine defined the rolls as cylinders and added connections between them to represent the gearing in the machine. It included material properties of the PET web and friction between the web and the rolls based on physical measurements. Easy5 simulated the proportional–integral–derivative (PID) closed-loop motion controller.

“I found it very easy to define both the physical and control model with Adams and Easy5,” Hubert said. Hubert began his simulation efforts on a machine whose performance he felt left considerable room for improvement. Running virtual experiments with Adams and Easy5 also eliminated the cost of downtime on production machines.

Hubert said, “Coupling Adams, MSC’s multibody simulation solution, with Easy5 turned out to be the ideal way to model our roll machines and control systems.”

- Chris Baker is the product manager for Adams and Easy5 at MSC Software Corp. Edited by Mark T. Hoske, content manager, CFE Media, Control Engineering, mhoske(at)cfemedia.com.

ONLINE

Also see related article with more application information and photos below: Simulation software boosts machine productivity



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.