Smart Factory 1.0 is helping China's industry to upgrade

Control Engineering International: China’s “Smart Factory 1.0” proposes that domestic manufacturing equipment should provide digitization and networking, with the third generation of research and development, facilitating concept, innovation, virtual simulation, and rapid prototyping.

07/15/2013


The “Smart Factory 1.0” exhibition area at the Industrial Automation Beijing 2013 exhibition. Courtesy: Control Engineering ChinaBuilding on the “Industry 4.0” concept, discussed heavily at the 2013 Hannover industry exhibition and proposed by Germany's government, China has been working on an innovative industrial model called “Smart Factory 1.0.” Some automation companies, research institutes, and system integrators are working to define this innovative industrial model for China's manufacturing, to meet the demands of China's industrial reform.

A group of companies, including Beckhoff Automation, Elco, and E-Cube, are actively involved in the concept’s definition and promotion. The Smart Factory 1.0 concept has proposed a realistic specification for equipment manufacturers and terminal factory users of China.

For equipment manufacturers, Smart Factory 1.0 proposes that domestic manufacturing equipment should provide digitization and networking, with the third generation of research and development, continuing the steps of “concept, innovation, virtual simulation, and rapid prototyping.”

Smart factory technologies

Multiple motors with direct drive, industrial Ethernet, smart sensors, modular hardware, and software also should be widely used in manufacturing equipment. In addition, safety, remote monitoring and diagnosis, and optimization of energy efficiency should be supported.

For terminal factory users, Smart Factory 1.0 proposes using digital network equipment, achieving widespread integration of the automation system of the workshop level and the on-site level. It also proposes that interoperability and information standardization of the main equipment, and flexible production, should be achieved.

Smart Factory 1.0 also suggests that an energy efficiency management system for production equipment and production materials and predictive maintenance should be used as soon as possible.

In China, industrial reform often depends on two motivating factors: government guidance and the needs of industrial users. Smart Factory 1.0 fits with each aspect. While industrial intellectualization and information integration is the main focus of government industrial policy, domestic equipment manufacturers and factory users also are seeking more competitive and economic solutions to cope with increasingly fierce competition.

Practical implementation

Unlike Industry 4.0, Smart Factory 1.0 is not focusing on the most advanced technology but on the practical implementation of existing leading technologies as needed by industries in China. Despite all the automation technologies introduced into the Chinese market for many years, there are big differences in how industries and enterprises apply those technologies.

At the Industrial Automation Beijing 2013 exhibition, Smart Factory 1.0 was shown as an important development. As one of the major promoters of the concept, Jian Wang, the general manager of E-Cube, said, “We hope more people and enterprises can understand and accept the ‘Smart Factory 1.0,’ so they can gain actual economic benefits and high efficiency, and more easily connect to international technology trends.”

- Henry Qiao is an editor, Control Engineering China. Translation from a recent edition of CE China was edited by Mark T. Hoske, content manager, CFE Media, Control Engineering, mhoske(at)cfemedia.com.

ONLINE

www.cechina.cn 

www.controleng.com/international has other international reports 

Key concepts

  • With China stepping up interconnectivity and digitization efforts, should other areas of the world do the same?

 



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.