Smooth motion control strategies

Cover story: Integrated systems, efficiency, motion profiles: Automated guided vehicles integrate power, without batteries; Variable frequency drive configuration, high-efficiency operation, and permanent magnet motors; and motion based profiles, libraries ease integration.

12/22/2013


Automated guided vehicles can advance asynchronously with careful integration of multiple systems. Courtesy: SuperiorControls

The Control Engineering December 2014 cover story discusses: Integrated systems, efficiency, and motion profiles. See more about each, and a link to the longer online version of each, below.

Automated guided vehicles integrate power, without batteries

SuperiorControls doubles assembly line throughput without increases in floor space or staffing by integrating battery-free automated guided vehicles (AGVs) with controls and manufacturing execution system (MES). A manufacturer of large, off-road vehicles had three objectives for an existing assembly line:

Key concepts

  • Battery-free automated guided vehicles (AGVs) use inductive power transfer.
  • AGVs integrated with automation and tracking software.
  • Assembly line doubled throughput without an increase in staffing or floor space. 

Variable frequency drive configuration, high-efficiency operation, and permanent magnet motors

Permanent magnet alternating current (PMAC) motors are seeing increasing demand in variable-speed, high duty-cycle motion control applications due to their higher efficiencies and energy saving potential across different speed and torque ranges.

Key concepts

  • Properly configure variable frequency drives for permanent magnet alternating current (PMAC) motors for optimal system performance and desired energy savings
  • Heed safety concerns if PMAC motors rotate in an unpowered state. 

Motion based profiles, libraries ease integration

When determining the best standards, protocols, and solutions for a motion application, it’s always best when done from the point of reference of the motion profiles. Electrical engineers and programmers must ask what must be accomplished with the motion system and work toward solutions that push the user to the correct methodology.

Key concepts

  • Software can simplify integration of numerous motion-specific technologies (drives, actuators, motors, etc.), and auxiliary components, while managing multiple fieldbus networks for seamless integration.

See additional Control Engineering stories related to motion control from the December issue here on the Control Engineering archive page.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.