SPS Show: Molex makes new PROFIBUS connections

Device protocol kit, remote module allow for expanded use of controllers

12/01/2010


Molex made two major product announcements at the SPS Show in Nuremburg this week, designed to improve connectivity for PROFINET devices and a wide variety of controllers.

The Brad IO-Device protocol development kit version 2.2 for PROFINET enables OEMs to develop and market their own branded PROFINET IO devices. Fully-compliant with PROFINET IO version 2.2 specifications, the Molex protocol stack supports conformance Class-B and has already been integrated on customer system platforms and successfully PNO-certified by the PROFIBUS User Organisation.

The Molex IO-Device stack can be ported on any customer platform both quickly and easily. At the SPS exhibition, Molex demonstrated the IO-Device stack’s portability by running it on an Apple iPad tablet PC connected to a Siemens S7-300 controller. The iPad application simulates a Molex IP67 PROFINET I/O device where it is possible to start and stop the stack, read inputs and write outputs digital value, and generate alarms.

Molex also debuted the Brad SST PB3 Remote Module for PROFIBUS. This stand-alone hardware platform includes PROFIBUS and Ethernet communication ports, enabling fast and easy connectivity to any Rockwell ControlLogix and CompactLogix controller.  The PB3 module, which will be available next year, features a unique remote design that enables it to be installed close to the PROFIBUS field device, reducing the expensive cabling costs that can occur when the controller and field device are in different locations.

“The PB3 module provides the same features of an in-chassis module, but is more flexible and easier to use,” said Molex product manager Eric Gory.  “Its remote design means the PB3 module can be installed in any convenient location such as inside cabinets, on machines or in cells. Additionally, because of its Ethernet media, the PB3 module can be used in specific applications where a wireless connection is required.”

The PB3 Remote Module fits factory automation, process control and machine building applications.  It is fully integrated into the Rockwell Software Architecture through features such as ‘Add-on-Instructions’, which saves integration time; Ethernet switch with redundancy capability, direct access to I/O data without the need to write ladder logic and complete access to PROFIBUS DP-V1 services and device diagnostics.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Big plans for small nuclear reactors: Simpler, safer control designs; Smarter manufacturing; Industrial cloud; Mobile HMI; Controls convergence
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.